Jump to content
SAU Community

Recommended Posts

when you say trouble starting.. do you mean you need to turn the ignition more then once and give a bit of gas whilst it idles? if so this happens to mine and i thought it was normal ? =\

Need more info. Car type ? Doe it have a computer ? What plugs are you using ? Have you reset the standard computer if thats what your running ?

its a gts r32 with stock compture the plugs are just standed ngk ones chanded a while back

I had problems with this for a bit also rough idling. Was told by racepace that it was my air flow meters. They just needed a clean. Just used throttle body cleaner in a pressure pack. Gave them a quick spray and was all good. Apparently they get a build up of shit on them. Maybe try that.

Clean AFM, good start, definately. Could be water temp sensor but I would think that would only keep it in cold start longer. Check all your earths as fuel pump, coils are severely affected by bad earth. Couldn't be fuel filter blocked as it would affect overall performance. Hmmmmmm........

could be:

cold start valve

IAC valve

AAC valve (or a combination of all 3)

fouled plugs caused by the above

fouled plugs caused by them being too cold temperature plugs

weak coil packs or ignitor

dirty/faulty AFM

and if the ecu is aftermarket, i'd say the tune needs adjusting.

also try letting the fuel pump prime properly before turning the car over. there is a small possibility that the valve in the pump is dodgy and letting the fuel drain back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...