Jump to content
SAU Community

Recommended Posts

Hi all. So I've had a bit of a look around on the site and I think I've worked some stuff out. But still have a few Q's.

Q1. Does the Stag share all Suspension Arms and Bushes with the 33GTR or just some of the bushes?

Q2. I've heard that there is not much gain from fitting a new Front Swaybar so I was just gona get the rear (probs Whiteline). True/False?

Q3. I was just gona use Sydneykids Part Numbers from his Group Buy. These should still be correct shouldnt they?

I did a search of the part numbers he used on the Whiteline website and they come up so assume they will still be fine.

I'll be going into a few suspension places on the weekend and getting a few quotes etc. But I just wanted some thing to go in with. Cause as we all know their gona go "It's a What" :)

< As you can see its a RS Four S.

Thanks to all in advance.

I will let you all know what the suspension places say.

Mattye

Link to comment
https://www.sau.com.au/forums/topic/303024-suspention-bushes-etc/
Share on other sites

Q2. I've heard that there is not much gain from fitting a new Front Swaybar so I was just gona get the rear (probs Whiteline). True/False?

True for me. I bought the rear one and it made a huge difference. Put the front one on a few months later but I didn't notice any significant improvement. Other people's experience may be different.

Q1. Im in the same boat as you mate :) No idea

Q2. You have the stockie on? it is after all just a length of metal, I like the front one on if for nothing else but fighting the torque monster.

Get a rear one though, it makes a huge difference

RS4S has a larger rear swaybar (24mm hollow) so the upgrade to the whiteline 24mm solid bar isn't as big a jump as the auto versions. The increase in rate is something like 70% (from memory) from hollow to solid bar. It doesn't make a huge difference like on the autos.

I am having a senior moment regarding the change in front bars.

SK's part numbers should be fine, Use tein s-tech springs. I am running 24mm swaybars front and rear, feels nicely balanced, order shocks from heasmans sydney and the rest of the stuff locally, get the swaybars from SELBY as that is the company SK used to get them made by.

I upgraded my rear sway bar with a White Line item... had that flimsy 19mm hollow thing now to a 24mm solid. WORLD of difference. Handles like a Sedan :happy:

One thing I did note when ordering, ALL GTR bars are the same. If you check BOTH Selby and White Line sites ALL the GTRs have the same part numbers/options. I also cross referenced the Stagea listing on the Selby site, same numbers!

For what ever reason why some one would, you could bolt up a solid 27mm item. As the Skylines also share

the same design as their GTS / GTT counter parts.

front and rear bars made a huge difference for me but I've got a S1 Auto. You don't even have to really replace the springs straight away if you don't want to. The standard rates are quite good as it is and a little more comfortable as well. Depends if you planning on lowering it a lot or just a bit. You can still lower the car with the stock springs as your moving the lower spring seat. Order the bilsteins from heasmans and get them to machine extra circlip grooves in so you have some more height settings to play with, get the bushes from whiteline and and bars from selby. You should be able to order all the parts yourself and then just take them into which ever shop you choose to install the gear for you. But if you do plan on changin the springs as someone else said the tein s-tech springs seem to be quite popular. Might be quicker than getting whiteline to make some up.

Hey Guys probs should have said that I already have full adjustable coilovers all round. Its already lowered and quite a hard ride. So i'm only lookin at gettin bushes and swaybar. Hopfully if putting a new rear bar on it will stiffen up the rear enough so i can soften the suspension up a tad.

Hey Guys probs should have said that I already have full adjustable coilovers all round. Its already lowered and quite a hard ride. So i'm only lookin at gettin bushes and swaybar. Hopfully if putting a new rear bar on it will stiffen up the rear enough so i can soften the suspension up a tad.

Out of interest, what Coilovers are you running?

Im running 'Super Flex Wagon by Tien' direct out of Japan (not Aus specs) with 6kg springs.

I personally wasnt very impressed, but the new rear sway bar brought the bar up that much

more to make me satisfied. Although, I wouldnt mind it a little bit stiffer :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...