Jump to content
SAU Community

Mufflers

KezR33

By KezR33,
in Engines & Forced Induction

 Share

Recommended Posts

KezR33 Veteran

KezR33

Posted
Posted

Been having a discussion on supraforums about whether or not the end muffler has any major effect on the sound a car puts out. Obviously the difference between a 1" pee shooter and a 5" cannon will be different, but if you had two of the same car, with the same set up all the way back to the rear muffler would two different cannons make a large difference to the noise? I figure a cannon is a cannon and brands will only change the note slightly.

Anyway, the reason I'm bring this here is because I currently have a Varex muffler on my car, but my car is quiet enough not to need it in the first place. A mate of mine wants to buy it off me, so I told him to buy me a replacement and I'll give it to him for free.

IF there is a difference, can anyone recommend me a decent muffler only (not interested in a catback, already have a custom system) to replace mine with? I asked on the Supra forums but compared to SAU they're utterly dead.

Thanks for any input guys, and sorry for bringing another exhuast thread in here. :huh:

Link to comment
https://www.sau.com.au/forums/topic/303709-mufflers/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

the shape and size of the muffler plays a big part on how it sounds. if you get 2 cannons roughly the same size then they will more than likely sound very similar. but if you get a cannon and compare it with a big oval muffler then the sound will be totally different as the oval mufflers have a lot more packing in them and generally make the car quieter and generally give a less raspy sound.

a perfect example is some of the lancers etc you see getting around. they have cannons on them and often sound like a rotary once they floor it. yet if you see one with an oval muffler on the rear they just sound a bit deeper and louder than normal and don't usually sound like arse.

as for cannons being cannons, as i said to start with, size comes into it as a bigger bodied cannon will be quieter than a smaller bodied cannon with the same pipe though the centre. this is because they have more packing in them to soak up the sound. also better quality cannons will generally be quieter as well for the same size body simply because they put more packing in them and better quality packing.

Link to comment
https://www.sau.com.au/forums/topic/303709-mufflers/#findComment-5032141
Share on other sites
KezR33 Veteran

KezR33

Posted
  • Author
Posted

Thanks for the info mate.

I actually wrote out a rather long and indepth reply then got some error when I tried to post it and lost it.

I was mainly asking if different materials have an effect, like titanium, and what kind of effect.

Also, what would recommend for me. I want to keep my racey, high-pitched note, or even improve it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/303709-mufflers/#findComment-5034847
Share on other sites
scathing Grand Master

scathing

Posted
Posted
I was mainly asking if different materials have an effect, like titanium, and what kind of effect.

It will. Different materials will have different tones. I'm not sure how much volume itself will be affected.

Mild steel tends to have a deeper tone than stainless. Titanium exhausts tend to be very thin-walled, which makes them a bit tinnier as well.

Link to comment
https://www.sau.com.au/forums/topic/303709-mufflers/#findComment-5035451
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

yeah the same goes for stainless. it is usually slightly thinner than mild steel as well, so gives a slightly different note. however for the actual muffler itself this effect is lessened compared to the piping as there is the muffler packing to reduce the difference.

Link to comment
https://www.sau.com.au/forums/topic/303709-mufflers/#findComment-5035798
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...