Jump to content
SAU Community

Recommended Posts

$18,000 call or sms Jez 0414879711 located central coast NSW

this is a fully built car, nothing to spend just keep changing tyres :D

i sold my old GTR to build this car, i love this car but its time for me to get another GTR so its time to sell.

i built this car to handle drift and drag racing, i have only done a few track days since the big makeover and

been to the drags twice with a best of 11.32 1/4 mile @ 127.55MPH this is with drift suspension and fully setup for drift. big improvements can be easily made to get into the 10's.

car makes 272KW on 21PSI. with some e85 or race fuel more boost can be safely put through this motor.

with the tomei solid lifter conversion this motor safely revs to 8500rpm and can be revved to 9000rpm. for a SR 20 that is awesome.

see an interior view of this car in action

I will try my best to add everything but im sure i will leave a few things out and i will update it as i remember.

91 S13 Silvia.

ENGINE

SR20DET 2000cc

fully built by TM Autosports

JE/Nitto pistons and rods

ARP studs throughout

Nitto headgasket

ACL race bearings

GTiR oil pump and oil pump drive with modded oil pick up

solid lifter conversion with tomei parts,

tomei solid 260 12mm cams

Vision cam gears

extended sump with baffles.

BOLT ONS

Garret 3071r .8 rear housing mounted to a low mount GK tech stainless manifold modded to suit the Tial 38mm external wastegate thats on it.

JJR 3inch bellmouth front and dump pipe, JJR 3inch exhaust with crisp note.

2.5 inch custom intercooler piping to big front mount.

custom intake to turbo.

custom clutch

740cc injectors on stock rail. walbro intank fuel pump.

oil cooler relocation and cooler kit.

JJR radiator and nismo low temp thermostat.

custom oil catch can that never even sees any oil

DRIVELINE

custom clutch (will update brand once i ask my tuner)

kaaz 2 way LSD with rebuilt 4.3 ratio diff.

SUSPENSION

absolutely everything has adjustable arms front and back with pillowball joints

HSD HR coilovers.

whiteline front and rear upgraded swaybars.

front strut bar.

NP Wonder steering knuckles that gives ALOT more steering lock and reduced ackerman to give better control and speed while sideways

s15 front and rear lower control arms to give a wider track.

BRAKES

s15 front brakes (and rear brakes as spare)

R33 rear brakes with new rotors and project MU drift spec pads

Hydraulic handbrake (E-BRAKE) D2 with 5/8 master cylinder to increase brake force with less effort.

ELECTRICAL

ViPEC V44 engine management

ViPEC boost control

ViPEC launch control

ViPEC flat shift control

SABER series 2 -oil temp, oil pressure, water temp and boost gauges mounted on dash.

INTERIOR

Sparco drivers racing seat with custom rails.

Drivers harness

Pair of GTR r32 front seats will be supplied

interior in the back is FULLY stripped

still has door trims and stock dash.

EXTERIOR

custom paint job with flared gaurds.

17x10 D1R's all round with 2 spare,

a spare set of 17x9 drifteks

URAS GT Wing that is easily removed and refitted when needed.

DVS5131.jpg

DVS5132.jpg

DVS5133.jpg

DVS5134.jpg

Edited by DVS32R
Link to comment
https://www.sau.com.au/forums/topic/303768-driftdragstreet-s13-silvia/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...