Jump to content
SAU Community

Recommended Posts

hey guys, just asking everyone to keep an eye out for my 31.

she was taken from my house sometime on monday night, has an exhaust on it so thay would have had to roll it down the street to fire it up (pretty quiet street on a hill).

Car is an S3 auto exec with a import front (projectors,hids,gts grill) and electric windows. has a Garage 7 sticker on the (cracked) windshield and 31club stickers on the rear 1/4 windows.

wheels were 15x7 weds 3 piece.

worst thing that pissed me off was that it had alot of horse gear on the back seat, that has taken years to gather. i would be content if i were to just retrieve that alone.

Rego is victorian WIK006 car was located in Hillsborough, actually found the dash matt on Hillsborough road heading towards Warners Bay.

20-10-2009007-3.jpg

exhaust004-1.jpg

would be greatly appreciative if people could just keep an eye and ear open.

thanks

Edited by ST1LO
Link to comment
https://www.sau.com.au/forums/topic/303773-stolen-r31/
Share on other sites

sorry i dont know the newcastle area very well, it was found in toronto.

got it back today, after looking at it i dont think i wanted it back.

i dont even know where to start with it

mmmm not far from my house! :)

I agree with not wanting it, kinda like it's been 'raped' and you don't want to catch AIDS driving again. :)

Link to comment
https://www.sau.com.au/forums/topic/303773-stolen-r31/#findComment-5040481
Share on other sites

mmmm not far from my house! :ph34r:

I agree with not wanting it, kinda like it's been 'raped' and you don't want to catch AIDS driving again. :down:

this is a bad question and i wouldn't really expect you to answer it but i am curious as to the condition you got it back in? - this is pretty much every enthusiasts worst nightmare :(

Link to comment
https://www.sau.com.au/forums/topic/303773-stolen-r31/#findComment-5040673
Share on other sites

morons tho the HID ballast sits right in front of the pod filter lol.

mainly all fixed now tho, pick up an ignition surround, lock set and rear 1/4 windows on the weekend.

i have another ignition in there atm but would like matching keys and a boot lock lol

Link to comment
https://www.sau.com.au/forums/topic/303773-stolen-r31/#findComment-5043707
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...