Jump to content
SAU Community

R32 Coilovers?!?!

Jack_Sky
 Share

Recommended Posts

mystery_kid Mentor

mystery_kid

Posted
Posted

8/6 is fine if you have some decent valving in them ie. not ISC or whatever wizbang shit is coming out of korea these days

i also drive around with the front on max hard and the rear on half way and i've not had any issues with the car jumping around, but you can play with the damper adjust

also getting adjustable sway bars gives you more option for mountain or track drift

Habler Rising Star

Habler

Posted
Posted
hmmm... so youve got 7/5kg SD's with 24m sways... id probs run something like that or possibly 8/6 with the 24mm sways would be abit more suited to my car because its primarily drift, i dont drive in the hills too often.

how much did a set of SD's cost in Aus???

Like White GTS-T said... stiffer doesn't always mean better for drift. It will usually just result in you just being slower. At the end of the day any set-up that gets you to the track to actually enjoy drifting will be ok. Then go from there as you learn what feels right and what doesn't.

Jack_Sky Rising Star

Jack_Sky

Posted
  • Author
Posted
8/6 is fine if you have some decent valving in them ie. not ISC or whatever wizbang shit is coming out of korea these days

i also drive around with the front on max hard and the rear on half way and i've not had any issues with the car jumping around, but you can play with the damper adjust

also getting adjustable sway bars gives you more option for mountain or track drift

Yeh, well a good set of coilovers like im looking at getting im sure will have suitable enough valving and adjustment.... Yeh, thinking of getting some adjustable sway bars over 24mm thick front and rear....

Like White GTS-T said... stiffer doesn't always mean better for drift. It will usually just result in you just being slower. At the end of the day any set-up that gets you to the track to actually enjoy drifting will be ok. Then go from there as you learn what feels right and what doesn't.

I can understand this, because the shocks that are in now are very stiff and the rebound is hektik... so the car just bump steers and jumps all over the place... when im drifting its alrigh tho.

But i wanna get this right the first time, hence why im trying to find out what would be suitable for my needs. I think ive almost got it tho.

White GTS-T Mentor

White GTS-T

Posted
Posted (edited)

I can see your concerns as its a big decision and a big purchase. But if the car is primarily going to be used for drift then you'd be hard pressed to go passed the SD's. The valving of the SD's are specifically suited to drift, with the spring rates to match. If i could offer one piece of advice it would be to copy someones setup that works. That might sounds stupid as everyones driving style is different, but that's what i did with 'Simon-R32's setup, as i knew it was a proven performer. I just customized it to suit my driving style. Like you said, you think my car has too much body roll, that could be tuned out with thicker swaybars etc.

I got my SD's from Japan for $2000 delivered. At the moment, one of the sponsors on NS has them advertised for $2610 plus shipping.

Email Streeter for a price http://www.jessestreeter.com/

Edited by White GTS-T
Jack_Sky Rising Star

Jack_Sky

Posted
  • Author
Posted
I can see your concerns as its a big decision and a big purchase. But if the car is primarily going to be used for drift then you'd be hard pressed to go passed the SD's. The valving of the SD's are specifically suited to drift, with the spring rates to match. If i could offer one piece of advice it would be to copy someones setup that works. That might sounds stupid as everyones driving style is different, but that's what i did with 'Simon-R32's setup, as i knew it was a proven performer. I just customized it to suit my driving style. Like you said, you think my car has too much body roll, that could be tuned out with thicker swaybars etc.

I got my SD's from Japan for $2000 delivered. At the moment, one of the sponsors on NS has them advertised for $2610 plus shipping.

Email Streeter for a price http://www.jessestreeter.com/

hahah, yeh i already talked to jesse.. i thought we were ment to keep this guy on the low down... it will work out to be about 1900 or 2000 off him soo all good. Woo hoo! i am gonna get SD's.... and some phat sways..

Habler Rising Star

Habler

Posted
Posted
hahah, yeh i already talked to jesse.. i thought we were ment to keep this guy on the low down... it will work out to be about 1900 or 2000 off him soo all good. Woo hoo! i am gonna get SD's.... and some phat sways..

Quite the opposite.. spread the word about him as much as possible so he can keep doing what he is doing.

Jack_Sky Rising Star

Jack_Sky

Posted
  • Author
Posted

hmm, ok fair enough... excellent. hopefully he is there in years to come then. hahah

fail on Tein for having to pay for different spring rate...

im just gonna get 7/5kg and get some massive sways, see how it goes.. then if i need to ill get stiffer spring rates later.

mystery_kid Mentor

mystery_kid

Posted
Posted

you'll probably be right with those rates, you have the damper adjustability which i've found makes a bit of difference on mine anyway

i softened them right up when i was at a track day which was pissing down rain

like a week later i changed them to full hard on the front and middle on the rears and it was like a totally different car

gwin Proficient

gwin

Posted
Posted

you'd want to stay away from super street, flex or mono flex series. They are for "street" use.

Try NA or HA, I think they even have a drift specific one too

I've used HA, it's a bugger of a setup to drive as a daily but it really does perform for time attacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...