Jump to content
SAU Community

Recommended Posts

Hey guys, I've been given a R34 GT-T ECU thats been reflashed/tuned by Dr Drift, could I plug this into my R33 S2 GTS25T? I'm guessing it's not going to be plug and play, I didn't achieve much out of searching. has anyone done anything like this before? I've also been given Splitfire coilpacks for a R34, bigger fuel pump and bigger injectors. a quick search tells me the coilpacks will fit a S2 R33, but the injectors won't without modification. Help is much appreciated, cheers.

Rover.

Link to comment
https://www.sau.com.au/forums/topic/304233-r34-retuned-ecu-into-r33-s2/
Share on other sites

The R34 ecu has a diffrent pinout/plug to an r33, so unless you use the r34 loom aswell it won't work. Or splice the r34 loom plug into your r33 loom. But either option would be quite a big job. What is the ecu tuned for? I.e what mods etc was the r34 running? Would be interested in buying it off you if you decided it was too much work to make fit. Hope this helps you.

The R33 S2 and the Neo version coil packs have the same plug however the Neo coil pack has 2 mounting bolt holes and will not bolt on to the R33 coil pack rail as spacing is different.

The S2 coil pack has 3 mounting bolt holes.

So the Neo coil packs should work in the R33 if it comes with its rail.... providing the entire rail will bolt on to the R33 head.

The R34 ecu has a diffrent pinout/plug to an r33, so unless you use the r34 loom aswell it won't work. Or splice the r34 loom plug into your r33 loom. But either option would be quite a big job. What is the ecu tuned for? I.e what mods etc was the r34 running? Would be interested in buying it off you if you decided it was too much work to make fit. Hope this helps you.

the ECU came out of a 34 that had splitfires, blitz ebc, fuel pump, injectors, bigger turbo and fmic. Currently tuned to 270rwkw. All belongs to 'hamoti' on here who wrote it off a few years back. I'll have a chat to sam from dr drift tommorow. Cheers.

So the Neo coil packs should work in the R33 if it comes with its rail.... providing the entire rail will bolt on to the R33 head.

Neo coils bolt directly to the head, no rail. They are also all facing the same way and the spark plug is in the center. I know some guys here that will just sit the coil on top of the plug with nothing holding it down because Neo packs are hard to find.

As for this ECU swap, it will be very hard to get it right. The VCT solenoid works differently in the Neo than the R33. Also, the Neo has more vacuum switches to run emitions stuff that isnt on the 33 motor. It will be a big pain to switch over ECU plugs as well. Just save yourself the trouble and get a Z32 ECU if you want to Rom tune.

Spoke to Sam today, 34 ECU into R33 is too much trouble. And a flash tune on the stock 33 isn't worth it. Instead he suggested an R32 ECU + VCT controller, quoted me $1000 everything supplied, fitted and tuned. Sam also told me the Z32 ECU is an option but they're not quite right with idle and a few other things... He also gave me the option of GTR cams with cam gears for the VCT dilemma, but highly recommends an R32 ECU + VCT controller. Anyone have any other suggestions? I read Rising Sun on here can retune R33 ECU's, need more info though.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...