Jump to content
SAU Community

Recommended Posts

  • Replies 137
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Right, given the responses, I'm thinking of locking in a cruise in early March. Say sunday March 7th, meet 10am for 10.30am departure. Location and cruise route to be advised.

It'll be a nice 2 hours drive with what I have in mind.

Those who are not members of the SAU-SA club, I'll be bringing along some membership forms. Stagea owners more than encouraged to join!

:P

Just realised I'll be interstate this weekend :D Maybe next time!

I can grab a grinder from work, fix that sh#t right up :P

maybe chris can borrow his car for a morning...

i got one at home chad that will do the trick

bring it to glenelg north motorsport for the morning and we'll "fix" this stocker...

:D WOOOO!

I pick the car up next week, so I shall be coming on the cruise. Any update on what side of town / whereabouts it is? I'm not fussy, just curious.

I will advise a week before the cruise date. Some members don't like the location being advertised on the board.

:P

I will advise a week before the cruise date. Some members don't like the location being advertised on the board.

:stupid:

Ah I see, and that's fair enough :laugh:

So yeah, looking forward to it, fingers crossed the weather is nice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...