Jump to content
SAU Community

Recommended Posts

Hey I’m posting on behalf of a mate

1992 R32 Type-M

5 speed manual

Maroon

170xxxkms

REGO IS EXPIRED but can still be registered.

Selling due because i got in a front end accident and i can’t afford to fix it. What is needed to repair it is new front guards, bonnet, re-enforcement bar, a stock bumper, new front window as it is cracked, new battery, radiator, fan, and an air-flow meter.

WAS NOT A RIDE OFF and FRONT END ACCIDENT WAS NOT AS BAD AS I THOUGHT ENGINE WAS NOT PUSHED OR DAMAGE. Accident happened in August 2009 not that long ago.

Currents mods and stuff:

Front mount intercooler (was not damage in accident piping was not damage i was amaze myself when i saw the intercooler and piping not damage)

3” exhaust system (not too sure what it is bought it with the car)

R33 turbo (was already in the car when i bought it)

Heavy duty clutch

Struct bar

Stock suspension (changed the suspension because it was too low and my aftermarket front bar was like a few cm off the ground)

No pod filter (but will throw in a SARS pod filter for buyer)

No air flow meter as i SOLD IT to a mate.

Interior:

Interior is in ok condition few smoke burns on the driver and passenger seat and back

Blitz boost gauge

JVC head unit (with Bluetooth + remote)

2 6x9 Kenwood speakers in the back

2 Kenwood splits in the front (with stock front speakers but is fuzzy so i tuned it to the rear speakers only not that much to get new speakers)

Wiring for sub and amp (ready to plug and play)

Exterior:

A few scratches on the body (due to people leaning on the car with their belts but not that bad)

Stock GTR rims few gutter marks (with 60-70% tread)

BN - side skirts (hasn’t been painted still white few cracks)

BN – rear bumper (hasn’t been painted)

No front bar as it was damage in accident (it was a stock front bar) but can throw in my aftermarket front bar as i took it off to get repaired but since the car was in the accident i didn’t repair the front bar for an extra $150 ono up to the buyer just make an offer. Can see picture of the front bar if u are interested

The bads:

Need new central locking (use remote but car door does not locked)

Passenger window only can go down (only driver can make go up or down)

The side skirts and rear bar was just quickly fitted there are gaps and it was pop-riveted on so u need to take it off and then re-fit (but the front bumpers was a fitted nicely no gaps)

$4000 ONO

Could either fix it and sell it or drift it or turn it to a daily car

Im open to offers so why not throw me an offer but please no time wasters!!!

Welcome to have an inspection. Maybe more stuff but that all i can think of at the moment.

Call or message me for more details or information:

Name: bee

Contact: 0411 733 547

Located in SA (Parafield Gardens)

NOTE: its not as bad as it looks, come see it in person if your interested. Open to offers but no bullshit offers the engine is still fine.

Attached thumbnail(s)

  • post-44592-12644386578718_thumb.jpg
  • post-44592-12644395501528_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/305494-r32-gtst-cheap-cheap-open-to-offers/
Share on other sites

If your willing to separate parts i will buy all these following parts for the passenger side front. Could you Pm me prices and your location if your willing to thanks.

Lower control arm

Castor Rod

Swaybar mount

Tie Rod

Castor Rod Brackets Pair

yea more pics under engine bay and the passenger side front. Saying "minor" damage is very misleading to the inexperienced eye buddy, looks like your pulling your willy too much.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...