Jump to content
SAU Community

Recommended Posts

Hey was just wondering what people think of this package?

http://www.tweakit.net/shop/product_info.p...roducts_id=5090

I'll be running about 280rwkw on my rb25det

I broke my fpr when i was getting my half cut :D

So yeah decided to just grab an aftermarket one and this one popped up, any opinions?

Link to comment
https://www.sau.com.au/forums/topic/305522-fuel-system-for-my-25det/
Share on other sites

Just buy Nismo 555cc injectors, use the stock FPR.

1. Factory rail, fine

2. Factory fuel reg, fine

You only need injectors, which are around $750 delivered.

There is no need to go aftermarket anything other than the injectors, so leave it that way and buy a replacement OEM FPR.

Trade Nissan should be about the same, if not cheaper.

If i can get an entire RB26 loom for under $700, there is no way a FPR is going to cost anymore than $100-$150.

You'd be up for around $100 to get a Nismo item here so i don't see a difference enough to get excited about

cant remember exactly but nissan wanted well over 200 for a reg. it was cheaper to get a tomei with the rail adaptop and hoses etc. only reason i wanted a new one is because i busted 3 2nd hand ones in less than 5000km's, each time i didnt know they were broken until it was under full load and leaning out to around 15:1. so i got sick of 15yo shit

I agree changing stuff that doesnt need to be changed is a waste of time, effort and money. I say also stick with stock rail and a stock reg. but I'd go the 740's. HEAPS of head room for basically the same money.

just my 2c!

cheers

+1 for nismo 740s, i have heard from a reliable source they are better to tune than most.

also +1 for stock rail and stock FPR, get trade from nissan it shouldnt be too much. buying an aftermarket has zero advantage other than more useless bling bits you need to worry about at this level.

if your going to run twin external pumps or some BS then by all means go for gold on an aftermarket

If you don't need bigger - don't get them.

Only get 740's if you plan for over ~330rwkw later on.

Otherwise the 555's will do the job just as good.

you can never have enough headroom, that is until they become harder to tune.. then its useless.

in this case i have heard that the red nismo 740s are better to tune than the 555s. that being the SR RB specific red nismo items, not 740s in general.

yet yes, 555s will be enough ;) but for the same price i know i wouldnt think twice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...