Jump to content
SAU Community

Recommended Posts

hi guys

just a quickie for u all i have an arc air box atm and i want to fit a high mounted gt35 but still wanna use the air box as it was quite expensive and i think it is quite schmick looking in the engine bay

what i wanted to know is if i can make it fit with this turbo obviously with custom piping

i wont have a afm either as i will be using a wolf v500

cheers

julz

Link to comment
https://www.sau.com.au/forums/topic/305659-arc-box-gt-35-r/
Share on other sites

What car? what exhaust manifold?

I'm going to be running an ARC airbox in my 32gtst with high mounted GT35R on a 6boost manifold on my RB30DET. I have fitted 32R cooler/piping/bov's.

It's going to be tight but I do have enough room for the airbox, bov recirc and cooler pipe. I won't be able to fit an AFM in though so I'm going to pull the Haltech out of my wagoon and run that in the 32 as it has a 3bar map sensor.

Link to comment
https://www.sau.com.au/forums/topic/305659-arc-box-gt-35-r/#findComment-5056485
Share on other sites

6 boost manifold

plazmaman plenum

custom cooler piping

no afm as im running a wolf as posted earlier

im not worried about easy my mates a very good mechanic who will be doing it and we have both done alot of fab work for our cars before

Edited by GUN_METAL_GTR32
Link to comment
https://www.sau.com.au/forums/topic/305659-arc-box-gt-35-r/#findComment-5057519
Share on other sites

Should be asily doable with full custom cooler piping.

I'm using stock GTR piping setup so it has the bulkhead fittings, the airbox clears them and there looks like there will be enough room to get a couple of bends in there.

Link to comment
https://www.sau.com.au/forums/topic/305659-arc-box-gt-35-r/#findComment-5057712
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...