Jump to content
SAU Community

Recommended Posts

That is great feed back to get. So it does have rust.... I think you could put a C210 in a humidity crib, and never drive it and it would still rust out :P

$10K? :):ermm:

I personally don't think he'll get that.

Be interested to see what someone will pay for it though, just wont be me.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

The main areas are:

chassis sills and doors and along the sides of the roof.

The front guards were also prone (behind the wheel where it attaches to the sill)

Depending on the quality of the rubber seals in the boot, usually the spare wheel well, or the steel on either side of the boot (near the wheel well)

There are others, but I don't usually see more than that. Some have windscreens rusted out, but you don't know the history, as someone may have replaced the glass. The ones that I stated above are usually the ones that just happen due to poor design from Nissan

They can also get horrific rust in the chassis at the firewall at the corner of the engine bay, near where the bonnet mounts. If the windscreen leaks the dashboard can also corrode badly, taking the firewall with it!

The the metal clips in the rubber boot seal always rust - again often taking out the lip that it sits on - causing leaks, causing the wheel wheel, and hidy-hole for the tools and jack to fill with water, causing more rust etc... The bonnets rust really badly underneath at the front near the chrome trim.

To answer JDM's question, in short rust is a horrific problem for these cars.

It's not even a C210 GT-EX or what ever the turbo'd L20 version was. That's more desirable IMHO.

As far as i know the C210 2000GT-EX only came out in japan so would be quite rare in AUS.

Seriously considered going after this for about 5 whole minutes but them I thought of 33yo oil seals and hoses and prop shaft/diff seals and heater hoses and the non working A/C-"just needs gas" yep--sure and ?? wheel bearing seals etc , and the "not even driven to the shops" little old German lady ad infinitum--and I was outa there. :(

You know, I agree with this. The amount of people who advertise "body OK no dings/dints etc. and when you see the car in person it's stuffed really gets me down.

It's easy to live with those things. They can be fixed/replaced, old cars are relatively easy to work on. I've had my fair share of old muscle cars and they're piss easy to tinker. What gets me are people who say "body is perfect, not a ding or dent or whatever" but you see the car and it's not what they say it is.

Didn't meet his reserve first time around, so now one of two things will happen.

A) He lowered the reserve, everyone bids the same and it sells.

B) He didn't lower the reserve, but everyone tacks an extra $2000 onto their previous bid and the seller gets the money he wants.

Wait a minute...

C) He didn't lower the reserve, everyone bids the same, car doesn't sell again.

It'll be interesting to see what happens this time.

D) The same people don't bid because they were expecting a lower price to win. They obviously didn't want to go any higher, so perhaps a new bunch of people will now bid :D

Or not :thumbsup: --the thing has a few question marks over it now (as far as this posts subscribers may be concerned) and it may not be all roses and minty goodness, if I were an interstate bidder for this I'd certainly not punt until I'd had a good look at it 'in the tin' as it were.

I'd say you are on the money regarding a lower winning bid though.

Surely a max bid of half of what he was asking would come as a wake up call. When did anything pass in a $6000 in one week and sell for $11000 the next? Generally, relisted items work their way closer to a sale price of $0 with every auction that the item fails to find a home. I'm betting the the seller finds his pride and joy passes in for $5,500 this time around.

Meh, I was interested, but not now. I don't even care if it got sold for $6K on the knocker. Anyone who asks all the forums what the car is worth, and when told it's about $5k (classic skylines/skylines Aus/Ozdat, maybe more), and then thinks the price is going to be $10.5K due to a small minority who probably own one and want the price to go up so they can sell theirs? Forget it. He can keep it. I'll stick to trying to sell my 'reasonably priced' but willing to NEGOTIATE HR31.

Not that it make any difference, but both my 79 c210 coupe and my 81 c211 sedan had factory aircon. only my 77 coupe didnt, but it didnt have many boxes ticked at all.

cheers

Jason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...