Jump to content
SAU Community

Recommended Posts

depends on budget...originally I would say WRX but the real competitor to the EVO is the STI version.

so if we're talking STI and budget of $25k then I'd pick a bug eye STI or EVO 6.5 TME to get a nice copy.

EVO's are lancers so they could be better sleepers without the wings, etc. Mind you a STI with a FMIC and RS bonnet makes a stock looking impreza. Also depends if you like the rex burble, it's certainly something I enjoy :P

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5065242
Share on other sites

buy the one that has atleast the weight of the gear box behind the front axle and doesnt have a retarded whale dong rear differentail to try and compensate for rubbish weight distrubshion. there was a spec c that did reliable 10,s for not much coin in nzlc a while back

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5065409
Share on other sites

so my mate is wanting to buy one of these. mainly for street with a tiny bit of track use (maybe). we haven't decided on what year of make yet, so just general info. pros and cons from people who know would be great

The first thing your mate should do is go and test drive both. Thats the only way he can have an unbiased judgement on the two. We all have personal opinions of them both so heres mine. One of them is ok for shits and giggles and the other is a true warrior that will not disappoint and has many gtr owners nervous.

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5070318
Share on other sites

buy the one that has atleast the weight of the gear box behind the front axle and doesnt have a retarded whale dong rear differentail to try and compensate for rubbish weight distrubshion.

Should we choose the one that has the retarded cylinder configuration that means one bank of cylinders will have a disproportionately long manifold path to the turbocharger, forcing people to either run an uneven length manifold or adding pointless bends to the other side?

By all accounts the Evo is quicker, the WRX/STi is more streetable. You determine your requirements, you make your choices.

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5070336
Share on other sites

WRX = nicer interior, better day to day driveability (which makes it not as good as the EVO on the track), even with no mods the boxer engine purrs and sounds way better then the stock evo engine, rear seats split/fold 60 40 so can fit more luggage on long trips

EVO = track monster, much harsher for mon-fri driving, interior compared to the WRX is shite, your wife wouldnt like it, rear seats don't fold/split

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5071172
Share on other sites

depends hwo much you are spending and which models you have lined up...more information would be good. i'd buy a evo 6,8 and 9 and quite possibly 10 over the comepting sti's in those years.

but then again...i'm all for evos and i would never buy a sti but thats jsut me.

Edited by jakez88
Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5071308
Share on other sites

Should we choose the one that has the retarded cylinder configuration that means one bank of cylinders will have a disproportionately long manifold path to the turbocharger, forcing people to either run an uneven length manifold or adding pointless bends to the other side?

weight distrubution or the shape of an exhaust manifond ? i know which one is more important

also the "pointless bends" well there not pointless are they ?

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5071334
Share on other sites

+1 for the Evo. You really need to specify budget though. I drove a wrx and was not at all happy with it so I got a GTR. I drove an evo v for six months. It was in mint condition - wasnt as fast as the GTR but still aweseome to drive. I have not driven an STi yet so I cant make that comparison.

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5072422
Share on other sites

so my mate is wanting to buy one of these. mainly for street with a tiny bit of track use (maybe). we haven't decided on what year of make yet, so just general info. pros and cons from people who know would be great

A lightly-modded last of the 2.0 STi for $30k or less; find a 2.5 STi if he has more.

none of the EVOs at work are broken but some of the WRXs are

Put 240k kms on my original WRX; current STi has 90k. Zero broken parts on either (replaced original WRX clutch @ 120k kms, LHF wheel bearing @ some point but Wakefield will do that)

Perhaps broken things are more to do with the driver than the vehicle?

Cheers,

SW

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5073725
Share on other sites

A lightly-modded last of the 2.0 STi for $30k or less; find a 2.5 STi if he has more.

Put 240k kms on my original WRX; current STi has 90k. Zero broken parts on either (replaced original WRX clutch @ 120k kms, LHF wheel bearing @ some point but Wakefield will do that)

Perhaps broken things are more to do with the driver than the vehicle?

Cheers,

SW

i agree. past experience WRX's like most japanese cars are mostly unbreakable. start feeding more power pound for pound evo engine can handle more. but lightly tuned they are unbreakable. earlier models i'm talking the classic rex 10 years ago had gearbox issues if launched too hard repeatedly. but EVOs have exactly the same issue with blowing trasfer casings in their gearboxes with hard launches. EVO 9's are famous for blowing gearboxes with repetitive hard launching. some guys have blown the transfer casing 3 times in an EVO through gearbox abuse. spend some time on the Oz EVO forums you will see the EVOs have their fare share of issues too if treated with no respect. recent models included.

with either car. treat it well. and it will be good to you.

Link to comment
https://www.sau.com.au/forums/topic/306387-wrx-vs-evo/#findComment-5073735
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...