Jump to content
SAU Community

Wrecking S1 R33 Gtst Left Overs, Geelong, Vic

L18PWR
 Share

Recommended Posts

L18PWR Enthusiast

L18PWR

Posted
Posted

NO ENGINE OR GEARBOX

decent carpet, just needs a clean $10

complete heater/aircon unit $20

washer and overflow bottles $10

shell has a good drivers side rear quarter $50

near perfect taillights $50 a side for complete lights

perfect rear bar $50

good boot with wing, wing needs a bit of bog/fibreglass $50

aircon pump $20

front crossmember and rack, crossmember might be bent $30

front 5 stud hubs and uprights $50

good headlining $10

ignition barrel with key $50

stock castor arms $20

rear half of tailshaft $10

stock cooler piping $20

fuel tank with filler, no pump $10

rear cradle with all arms , no brakes, diff or hubs $50

3-3.5in cat back exhaust, single straight thru muffler $100

stock front shocks with hks lowered springs $50

also have non r33 stuff

pair of S15 stock mags $50

pair of 300zx stock mags $50

both painted black with crappy spray cans, would come off prety easy

full set of 300zx brakes and rear 5 stud hubs

front has: calipers, pads, lines and rotors...took pics but they disappeared

rear has: calipers, pads, lines, rotors, 5 STUD HUBS and handbrake cables

$600

also got some alloy 300zx/GTR rear upright things (what the rear hubs bolt to) $100 just been bead blasted so look like brand new

PICS some of that stuff is gone, but most of it is still here so if its not listed just ask

  • 2 weeks later...
  • 4 weeks later...
Jaissassin Enthusiast

Jaissassin

Posted
Posted

hey bud intrested in passenger mirror if the motor still working, front shocks, carpet and r the tail lights 50 each or 50 both side? if both side chuck em in too posted to 2165 pm for quote

  • 2 weeks later...
L18PWR Enthusiast

L18PWR

Posted
  • Author
Posted

kinda forgot to check this thread and the site stopped sending me email notification so sorry for not replying

no radiator

Jaissassin and tdwvs i'll send you PMs

also someone who wrecks wkylines saw this add and seemed keen for the shell and all the other stuff so it might be the last chance to get stuff cheap

rear bar, passengers side tail light, washer bottle and rear cradle have been sold

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Yeetus
      98 R34GTT 4k engine stumble

      By Yeetus · Posted

      Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • GTSBoy
      98 R34GTT 4k engine stumble

      By GTSBoy · Posted

      Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...