Jump to content
SAU Community

So I'm Buying An R34 Gt

SKITTLES

By SKITTLES,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

SKITTLES Experienced

SKITTLES

Posted
Posted

I recently found this skyline here. And I went to the bank to get a loan. The girl basically put her pen down when I said I was 17.

Do cars like these come up often?

If I were in the market in three months, could I expect to find something along the lines of this thing?

This is my first post to; so hello Skylines Australia :] I read the article in Imports, there are some nice Skylines on this board.

Link to comment
https://www.sau.com.au/forums/topic/307752-so-im-buying-an-r34-gt/
Share on other sites
RB25PWR Proficient

RB25PWR

Posted
Posted
I recently found this skyline here. And I went to the bank to get a loan. The girl basically put her pen down when I said I was 17.

Do cars like these come up often?

If I were in the market in three months, could I expect to find something along the lines of this thing?

This is my first post to; so hello Skylines Australia :] I read the article in Imports, there are some nice Skylines on this board.

Firstly welcome.

Secondly yeah you should be able to find a GT in a few months. They're not as common as falcadores but it's not like they're really hard to find.

Good luck!

SKITTLES Experienced

SKITTLES

Posted
  • Author
Posted (edited)
Firstly welcome.

Secondly yeah you should be able to find a GT in a few months. They're not as common as falcadores but it's not like they're really hard to find.

Good luck!

Excellent!

Just what I think I needed to hear!

Thanks mate :P

Edited by SKITTLES
  • 2 weeks later...
Ericjayrol Community Regular

Ericjayrol

Posted
Posted

If you want to find some around that price with even lower Km's you should keep an eye on Nagoya Motors, that is if your in the Sydney area.

I recently placed a deposit on a skyline just like yours with 91,800KM's on the clock, and it was only $12,900.

They are constantly importing P plate legal R34's and the ones at the $14,900 mark generally have closer to 50,000KM's on them.

From what I hear around this site, Nagoya Motors is generally trusted as not rewinding odometers, anyone who thinks otherwise let me know.

Silver_GT Collaborator

Silver_GT

Posted
Posted
If you want to find some around that price with even lower Km's you should keep an eye on Nagoya Motors, that is if your in the Sydney area.

I recently placed a deposit on a skyline just like yours with 91,800KM's on the clock, and it was only $12,900.

They are constantly importing P plate legal R34's and the ones at the $14,900 mark generally have closer to 50,000KM's on them.

From what I hear around this site, Nagoya Motors is generally trusted as not rewinding odometers, anyone who thinks otherwise let me know.

Not always the dealer that do the rewinding, 10-12 year old car (that is likely to be used as a daily in jap land, not llike a NUR GTR) with 50,000km? rarely.

Ericjayrol Community Regular

Ericjayrol

Posted
Posted

I see what you mean silver, but they do have some very good quality cars, in great condition at Nagoya Motors, I've seen a whole bunch as i've been flying in and out of the place over the last year while I was looking for a good R34. I've also heard around the forum people saying, base your purchase on condition, not KM's, so even if the KM's arent as low as stated, im pretty sure they aren't far off, or have been maintained very well.

All P platers looking for a skyline should take a look at their online showroom, I wont post up a link cause im not too sure about the rules on external linking on SAU, And im not advertising, I REALLY dont have any association with Nagoya Motors other than as a customer =P

CARSICK Rising Star

CARSICK

Posted
Posted
Yeah and if your going by the Odometer you will have to fork out for a 100k service in under 10k.. So your first service is going to be $$$$

^^^ Correct, so if you're buying from a dealer; and before you hand over your hard-earned $$, secure a deal from them that the $100kKm service is included in the price - especially obtainable near the end of a calendar month.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Turbodoc
      Noobie Stagea owner..

      By Turbodoc · Posted

      Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      See if you can thermal epoxy a heatsink or two onto it?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...