Jump to content
SAU Community

Recommended Posts

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.

post-70816-1265935805_thumb.jpg

post-70816-1265936129_thumb.jpg

post-70816-1265936152_thumb.jpg

post-70816-1265936179_thumb.jpg

post-70816-1265936208_thumb.jpg

post-70816-1265936296_thumb.jpg

post-70816-1265936323_thumb.jpg

post-70816-1265936351_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/307915-r32-gtr-1990-un-reg-15500-neg/
Share on other sites

so this has after market turbos, injectors, built engine and a standard ecu?

somebody spent 10k+ on the engine, turbos and injectors, but couldn't be farked spending 1k on a computer?

got any receipts to prove build?

Yeah, i hear what your saying, the ecu should have definatly been put in, but the standard on has been chipped and re-mapped. sorry the only receipt i have for the mods is for the twin plate clutch, i've only been told from the previous owners about all the mods.

sorry i couldn't tell you more.

cheers mark.

  • 2 weeks later...

yeh right - bog standard!

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...