Jump to content
SAU Community

Recommended Posts

I'm after a 3rd brake light for my 33 having dispensed with the standard spoiler.

I'm having trouble sourcing something suitable. I mean you can pick up a Chinese 'special' LED arrangement on Ebay, but I believe the law says the 3rd brake light needs to be 'shrouded'?

I can't low low mount 'cos of the wiper, so it needs to be high mount.

I am probably gonna trawl some wreckers to see what I can find, I doubt it will be easy to find something suitable due to cars having different rear wind shield angles etc.

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/
Share on other sites

I thought, if the car didn't come out with 1 you didn't have to have 1. But in saying that, the wife got pulled over the other day, as the rear spoiler light wasn't working, and she told the coppa that we are removing the wing in a week or two as it's getting a full respary, and we aren't putting it back on. Well, he recons by law we have to have an eye level stop light mounted on the window????????? I've looked and haven't found to many that are going to fit the curves nice at all, so I'll see how we go. My spoiler has been off now for a couple of years and never once been pulled over for it. So who knows mate, but there must be a law somewhere bout it.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087054
Share on other sites

i dont know if it would be the same, but i know not to long ago chris rogers had to find a 3rd stop light for a 32.

he ended up using one from either a camry or magna (cant remember which)

pm him and see what he used

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087061
Share on other sites

In some states a high mount brake light is an ADR requirement on any car after 1985 , cars that were in factory production first started using them , as standard therefore the ADR. I just recently had to fit one to my GTR R32 , i went to supercrap auto , and got them to order one out of a bosch catalogue book , cost 60 bucks for a 24 led adjustable high mount light and fitted it to rear window . sorted

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087065
Share on other sites

Yeah I'll go down to supercheap and ask.

I know the law says you need one, also in the event of being rear ended I would worry that the absence of one could be used against me.

Just from a practical POV they are good also. If you go out on a cruise and end up behind a load of de-spoilered Skylines (w/ no 3rd brake lights) it is annoying not being able to see when the cars way ahead on the road are braking. You have to me more 'reactive' - only being able to see the car directly in front - and so you get more of a 'concertina' effect going on, so more risk of crashes.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087301
Share on other sites

not long ago when i was trying to get a RWC here in melbourne, my mechanic picked up a simple stick on one like those you get from any auto store, as i also removed the spoiler and because of the angle it doesn't look perfect during the day, but at night it lights up really nice and you can't tell it's not perfectly straight and he gave me the nod and said its fine so yeah, im happy

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087526
Share on other sites

  • 1 year later...

for those that asked via PM.

3rd light is from a mitsi magna from 2002 on. they are LED ones and when you do it get the harness/mounts as well. sits neatly on the top of the glass.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5952796
Share on other sites

I went to supercheap and picked up a LED brake light for 30 bucks, Just a 7 inch or so long bar self contained with 12 LED's in it or something. Install was easy, comes with 3M tape already on the light casing, pretty much a basic wire in job.

Works a dream, bright and legal.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5953019
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...