Jump to content
SAU Community

Recommended Posts

I'm after a 3rd brake light for my 33 having dispensed with the standard spoiler.

I'm having trouble sourcing something suitable. I mean you can pick up a Chinese 'special' LED arrangement on Ebay, but I believe the law says the 3rd brake light needs to be 'shrouded'?

I can't low low mount 'cos of the wiper, so it needs to be high mount.

I am probably gonna trawl some wreckers to see what I can find, I doubt it will be easy to find something suitable due to cars having different rear wind shield angles etc.

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/
Share on other sites

I thought, if the car didn't come out with 1 you didn't have to have 1. But in saying that, the wife got pulled over the other day, as the rear spoiler light wasn't working, and she told the coppa that we are removing the wing in a week or two as it's getting a full respary, and we aren't putting it back on. Well, he recons by law we have to have an eye level stop light mounted on the window????????? I've looked and haven't found to many that are going to fit the curves nice at all, so I'll see how we go. My spoiler has been off now for a couple of years and never once been pulled over for it. So who knows mate, but there must be a law somewhere bout it.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087054
Share on other sites

i dont know if it would be the same, but i know not to long ago chris rogers had to find a 3rd stop light for a 32.

he ended up using one from either a camry or magna (cant remember which)

pm him and see what he used

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087061
Share on other sites

In some states a high mount brake light is an ADR requirement on any car after 1985 , cars that were in factory production first started using them , as standard therefore the ADR. I just recently had to fit one to my GTR R32 , i went to supercrap auto , and got them to order one out of a bosch catalogue book , cost 60 bucks for a 24 led adjustable high mount light and fitted it to rear window . sorted

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087065
Share on other sites

Yeah I'll go down to supercheap and ask.

I know the law says you need one, also in the event of being rear ended I would worry that the absence of one could be used against me.

Just from a practical POV they are good also. If you go out on a cruise and end up behind a load of de-spoilered Skylines (w/ no 3rd brake lights) it is annoying not being able to see when the cars way ahead on the road are braking. You have to me more 'reactive' - only being able to see the car directly in front - and so you get more of a 'concertina' effect going on, so more risk of crashes.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087301
Share on other sites

not long ago when i was trying to get a RWC here in melbourne, my mechanic picked up a simple stick on one like those you get from any auto store, as i also removed the spoiler and because of the angle it doesn't look perfect during the day, but at night it lights up really nice and you can't tell it's not perfectly straight and he gave me the nod and said its fine so yeah, im happy

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5087526
Share on other sites

  • 1 year later...

for those that asked via PM.

3rd light is from a mitsi magna from 2002 on. they are LED ones and when you do it get the harness/mounts as well. sits neatly on the top of the glass.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5952796
Share on other sites

I went to supercheap and picked up a LED brake light for 30 bucks, Just a 7 inch or so long bar self contained with 12 LED's in it or something. Install was easy, comes with 3M tape already on the light casing, pretty much a basic wire in job.

Works a dream, bright and legal.

Link to comment
https://www.sau.com.au/forums/topic/308127-3rd-brake-light/#findComment-5953019
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...