Jump to content
SAU Community

Recommended Posts

I just had about 100ml of beer spill onto the backseat of my car, I soaked up ~50% of it with a towel and then sat another dry towel over the wet patch to try suck up some more of it. What products can I use to get at this in the morning? Right now i'm off to bed cos ive had about 5 hours sleep since thursday.

Link to comment
https://www.sau.com.au/forums/topic/308131-spilt-beer-in-my-backseat/
Share on other sites

Still against the law to have open alcohol in the car while it's driving, even if it's a passenger. But seriously, how many of us still allow it. I know I do and I have never drunk drove in my life.

Try the Metho trick dude. The worst part about spilt beer is the smell after a while.

Still against the law to have open alcohol in the car while it's driving, even if it's a passenger. But seriously, how many of us still allow it. I know I do and I have never drunk drove in my life.

Try the Metho trick dude. The worst part about spilt beer is the smell after a while.

Haha yeah true. I have even been pulled over a few times with passengers that have opened alcohol and the police didnt mind as long as I'm sober.

Do I just pour some metho onto my back seat and leave it? Or should I dab at it with a clothe or something, I'll be trying it tomorrow. Today the car didnt smell to bad and you could only smell a faint beer smell if you sat in he backseat

idiot brother left a full stubbie on the rear footwell after they were predrinkin b4 goin in to a club. didnt bother to tell me. when i went to get the car at the end of the night, beer went every where. that is one of the worst smells imo. had to get it steam cleaned

Do I just pour some metho onto my back seat and leave it? Or should I dab at it with a clothe or something,

Just soak some rag with methylated spirits and dab the area. It'll evaporate anyway and with no stain and even less smell.

It wasnt me that was drinking. My asian friend decided his beer would be ok if he sat it down upright while I took a roundabout. That was his only his third beer as well and he's a big guy about 95kgs. asians cant drink

if it was a white guy i could help you, but asian beer stains are a different matter...

see if you can use a carpet cleaner. might be able to rent one somewhere.

I wouldnt go near one of those things. They are SHIT. I have 10 yrs carpet cleaning experience so I know.

Ring a carpet cleaner if your really keen to get it super clean. Most carpet cleaners hate doing cars so be nice and pull the seats out for him. If they try to charge you more then $100 to do both fronts and the back tell em to get f**ked. and make sure they use the hot water extraction method, not some half arsed dry cleaning bullshit. this goes for your carpets too.

If your in brisbane or gold coast PM me.

Edited by Flipmo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...