Jump to content
SAU Community

Recommended Posts

Item Summary: Black 1994 R32 GTR with minor mods

Reading: 100500km

Location: Sydney Area

Condition: Used

Reason for Selling: Getting married soon, so needed the money.

Asking Price: $16500

Delivery Methods: PickUp

Contact Info: 0424 68 5678 (Rob)

Extra Information: Willing to swap for a BLACK Honda Jazz ONLY (02 - 08 model) + cash my way.

Desciption

--------------------

Hi guys, the time has finally came to sell my baby. As much as I would like to keep her and build it up, I just can't afford to at this time since I'll be getting married by the end of the year, and I need the money for that. I'm the car's 1st owner in Australia and the it has been well looked after. Serviced every 5000k with Motul v300, so there is absolutely no issue with the engine. I had a compression test done about 6 month ago at Bell Garage and it came back 160 across all cylinders (have receipt and print out). It has been really reliable over the past 2 years and the only thing I had to fix was the brake slave cylinder and replaced throttle body gasket to metal ones, due to small air leak. Car starts 1st time every time and idles smooth at around 1000rpm. The turbos are still stock as far as I know (no issues with them so far), but I do have a pair of used (in excellent condition) Nismo RS580 turbo included in the price. They perform similar to the 2530's.

I have cleaned up the interior, installed new plush carpet, deaden the doors and floor....etc so it is extremely clean. I also installed a nice sound system and did some minor mods to the car in general. I have receipt for most of the work done on the car.

Below is the list of mods:

Engine/Drivetrain

---------------------

Nismo fuel pump

HKS EVC 3

Nismo S-Tune coilover (6kg/5kg)

Timing Belt, Idler, Tensioner, Waterpump, thermostat changed.

Catco 3" high flow cat

HKS SuperDragger exhaust + front pipe.

Raizin Voltage Stabilizer + Grounding

GRID T.S Dancer Atessa 4WD Controller

New Nissan Clutch Slave

Nismo Twin Plate

PiperCross High Flow Panel Filter

Interior

--------

Superior seat trim

Suerpior shift boot trim

Superior real carbon stereo surround trim

Superior handbrake boot trim

Superior console lid trim

Chrome handbrake handle

Drift button

Impul shift knob

Exterior

---------

Single front wiper conversion

HID

N1 bonnet lip

Angel Eye Bi-Xenon Projector Mod

Lenso D1R 17x10 +15 wrapped in 255 rubber

Factory Rear Pod

Sound System

------------------------

Alpine Type-R 6.5" splits front

Alpine Type-R 6.5" 2-way back

JBL 6 Channel Amp

MTX 12" Shallow Mount Sub

Kenwood DNX7320 DVD GPS Navigation

Other

--------------

Immobilizer

Pair of Nismo RS580 Turbo included in the sale.

I accept CASH only. Inspections welcome by appointment, serious offers / buyers only. No dreamers please!!!

If you have any questions, feel free to call or PM me.

32GTRFront1.jpg

32GTReye.jpg

32GTRdish.jpg

32GTRside.jpg

32GTRrear2.jpg

32GTRrear.jpg

32GTRrim.jpg

32GTRengine.jpg

32GTRinterior3.jpg

32GTRinterior1.jpg

32GTRinterior2.jpg

32GTRSub.jpg

32GTRamp.jpg

Edited by __PhaseShiftDown
Link to comment
https://www.sau.com.au/forums/topic/308431-fs-black-1994-r32-gtr-sydney/
Share on other sites

For those who have asked about the car, here are some clarifications:

- Car is straight with no major accident history. There was a small cosmetic repair on the right hand side just next to door. (I accidently scraped the side on a fence coming into a tight driveway). Other than that, there was no damage to the chassis or anything like that. But you are more than welcome to come and check it out yourself.

- The extra pair of nismo turbos included with the sale are in excellent condition. 1 has no shaft play at all, the other has very small amount of shaft play.

- Rego is until Oct this year.

- Carpet was replaced when I installed the sound system. It is black super plush 2 piece carpet from knox carpet. Underfelt was also replaced with sound deadening underfelt. Fit is great, looks way better than the grey factory loop pile, although the fit as not quite as snug.

Edited by __PhaseShiftDown

Very tidy and nicely done car.

Highly interested, alas, need to sell my car first. Will be in touch when my car sells, assuming this hasn't by then (but I don't think it should be on the market long at all).

Hi guys, the time has finally came to sell my baby. As much as I would like to keep her and build it up, I just can't afford to at this time since I'll be getting married by the end of the year, and I need the money for that. I'm the car's 1st owner in Australia and the it has been well looked after. Serviced every 5000k with Motul v300, so there is absolutely no issue with the engine. I had a compression test done about 6 month ago at Bell Garage and it came back 160 across all cylinders (have receipt and print out). It has been really reliable over the past 2 years and the only thing I had to fix was the brake slave cylinder and replaced throttle body gasket to metal ones, due to small air leak. Car starts 1st time every time and idles smooth at around 1000rpm. The turbos are still stock as far as I know (no issues with them so far), but I do have a pair of used (in excellent condition) Nismo RS580 turbo included in the price. They perform similar to the 2530's.
Very Nice looking car. Love the wheels! Are you the first Aussie owner?

...

Thanks guys, I have 2 buyers lined up for this. :D Maybe I listed it too cheap.... hahaha

How goods the smoke look with them rear tyres?

lol, I didn't even know they were color smoke tires. Got them home and thinking.. how come the edge are red??

LOVE the headlights. How did you get them done? Willing to sell them? (Can supply stock projectors)

Planning to sell the car as is. so if you want those lights, check with the buyer and they maybe willing to swap.

Very Nice looking car. Love the wheels! Are you the first Aussie owner?

Yea, 1st owner. So its it does really have sentimental value 2 me. Its like your 1st child.. .. well maybe not to that extent, but I'll definitely miss it.

Edited by __PhaseShiftDown

SOLD!!

Congratulations Luke. Take good care of her and keep in touch..

*sob sob*. I can't believe she's gone. Although I'm happy she went to a fellow forum member. ....

I'm totally and completely in love - I've wanted one since I was 6 years old, and finally the dream is realised :down:

Got pulled over by a highway patrol just after I left Brads.. 68 in a 60 zone (accidental, two turbos are faster than one). Popped the bonnet to find a stock airbox, and he let me go with a handshake and a congratulations for getting the new car!

I'm also not sleeping tonight. This car WILL eat my savings in fuel by the end of the weekend!

Many thanks Rob, I'll try to save up some cash and visit you for some parts.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...