Jump to content
SAU Community

Recommended Posts

It's cheaper to export you out of this country for asking vague questions.

Bit harsh on a newb with 10 posts to his name.

All depends on what your after, how much you want to spend and how long you can wait.

The good importers call give you a rough dollar figure for what your after, match that to a local car price and you've got your answer.

Do a search like "how much did it cost to import", that should give you lots of threads to look through.

It is cheaper and if your confident in a car you can save yourself alot of money. Its also more risky and alot of work. If your not confident with the process, lots of small things can add up, you should probably get an agent to help.

guys - before everyone gets consumed in this discussion, I think you'll find the best answer is this...

'welcome to the forum newbie. I notice you posted several threads all at once, most of which were meaningless, and probably simply because you need a minimum of 10 posts in order to PM someone, or even reply to a PM. Thumbs up for some relatively innocuous thread bumps, but please - at least next time put a question mark after your statement, so that it gives the remotest appearance of being genuine. Enjoy your time on the forum and hope you got that PM sent.....'

(I know this because I had to do the same thing)

Unless you want something new-ish or rare, it's generally cheaper to buy local. Once upon a time it may have been different, but it's pretty damn hard to land and comply a car for less than $10k, regardless of what it is or how much you paid for it over there. If you're talking about an R32, R33, Soarer, S13/14, 180SX, this generally isn't worth it, because they can be had locally for less. However, if you're talking about an R34, S15, Stagea, Legnum, Supra... It may be a little different. Just look into the costs of each man! And be more specific lol...

I'm assuming you're talking about importing from Japan, to Australia, and having it complied for street use.

Also depends on if it's pre/post '88 (I think it was? or '89). Import laws and therefore costs change around there.

  • 2 weeks later...

I can confirm that it is far more expensive to import then to buy locally (I'm finishing importing myself as a type this, car gets rego'd next week). Because importing can be a legnthy process (months obviously) you end up buying more and more stuff for your car before it has even arrived (E.g Bonnet, Wheels, Seats, Coilovers, Boost Controllers, Air Filters, BOVs, Ganadors...). In the end what you saved on your car you spent on mods and then some before you can even fit them :)

Because importing can be a legnthy process (months obviously) you end up buying more and more stuff for your car before it has even arrived (E.g Bonnet fins which stick on with 3m tape, chrome hubcaps, UNIT stickers, Ed Hardy Carseat Covers, Aluminium GT wings, Fuel Saver Tablets, Screw on Exhaust Trim Tips with LED's, LED Valve Caps, Green Coloured Headlight bulbs which are inexplicably expensive considering they're for "offroad use only", RM WIlliams Mudflaps. "Spotties", "Southern Cross" stickers. "FUUCK OFF WERE FULL" stickers. Nankang tyres when they're on special. and getting the car here and realising you don't have enough money to insure it...).

^^^hell yeah. importing is wicked fun! haha (im about to import myself - am i showing yet? it's still early days though but soon i'll have that healthy "i've imported" glow about me.

and guess what else - i won't put up a thread saying "my journey" and i'm also not going to post a build thread!

original huh.

Edited by Mr Eps
I can confirm that it is far more expensive to import then to buy locally (I'm finishing importing myself as a type this, car gets rego'd next week). Because importing can be a legnthy process (months obviously) you end up buying more and more stuff for your car before it has even arrived (E.g Bonnet, Wheels, Seats, Coilovers, Boost Controllers, Air Filters, BOVs, Ganadors...). In the end what you saved on your car you spent on mods and then some before you can even fit them ;)

Haha just bought wheels and coilovers for my Cube, hasn't even gone on a boat yet!

I can confirm that it is far more expensive to import then to buy locally (I'm finishing importing myself as a type this, car gets rego'd next week). Because importing can be a legnthy process (months obviously) you end up buying more and more stuff for your car before it has even arrived (E.g Bonnet, Wheels, Seats, Coilovers, Boost Controllers, Air Filters, BOVs, Ganadors...). In the end what you saved on your car you spent on mods and then some before you can even fit them :)

I fail to see the problem with this ;)

In answer to OP question. Maybe?

lol. so did I. :cool: depends on what we are talking about importing. sometimes yes. sometimes no.

given the bloke hasn't posted again I'd say he's happy with the response. :) it would have been a bit easier to give a more useful answer if we at least knew what type of car he wanted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...