Jump to content
SAU Community

Recommended Posts

Series 1 gtst complete car with some panel damage.

machenically spot on.

ARC return flow intercooler

splitfire coil pack

Full 3 inch 5 zigen exhaust turbo back.

heavy duty clutch

hks injectors

link ecu

Pivot shift light with controller

pivot boost guage

Greddy EBC

Full mongoose alarm

turbo timer

400r skirts

gtr rear wing

17x8 skid rims with rubber

ice

plus all the standard 33 components

Will be stripping and posting parts and prices over the weekend.

Give us a call if theres anything you need on 0413863207.

Link to comment
https://www.sau.com.au/forums/topic/309770-parting-out-complete-33/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

well yes of course itsd in qld.

Injectors will be flow tested prior to sale and will be 650 dollars providing they are fine.

Return flow cooler is 700 dollars pickup only. the very reason I advertised it in the qld section.

I will post smaller items but I am not dicking around with the larger stuff. Its here, come get it.

well yes of course itsd in qld.

Injectors will be flow tested prior to sale and will be 650 dollars providing they are fine.

Return flow cooler is 700 dollars pickup only. the very reason I advertised it in the qld section.

I will post smaller items but I am not dicking around with the larger stuff. Its here, come get it.

sorry for asking :cheers:

Hi Noel,

What turbo do you have on the car? Are you selling it? And what are the rims?

Thanks :cool:

turbz was a special mate. built by chris from mtq and way too big for a 25. Its going on dano's 30/25.

rimz are Wed sports RS5's. some rash, not deep but plenty of and easily repairable. 235 tyres on 8 inch rims and Iwill let the whole shootin match go for 300 dollars. make damn good skidders as they are or have them refurbished by depalu or similar.

Plenty of japlish writing on them too. :cheers:

Engine...sold

turbo....sold

Injectors.....sold subject to flow test

boost guage....sold

mirrors.....sold

pods.....sold

400R skirts.....sold

RB25 gear box with crossmember and shifter 1250 dollars. its a goodun. I drove it before i parted out the car

ARC return flow front mount i/c with all piping to bolt up. black stealth painted not a bent fin anywhere. 700 dollars

dash surround in excellent nick 100 dollars.

turbo back 5zigen exhaust with oval 5 zigen canon including dump and cat, a couple of small dents in front muffler but overall very good nick. quiet with a really nice exhaust note. 600 dollars

Centre console 100 dollars

gear shift surround with lighter 30 dollars

Ignition barrel with GTR key 100 dollars

Splitfire coild to suit series 1 rb 25 375 dollars

series 1 engine loom 150 dollars

RB 25 tappet covers painted red 100 dollars

33 rear bar in gunmetal 75 dollars

Starter motor 100 dollars

alternator 100 dollars

steering rack 150 dollars

full set of 33 gtst brakes front and rear 500 dollars

full power steering kit 150 dollars

choice of 3 series one instrument clusters. 75 kay, 105 kay, 155 kay. 125 dollars, 100 dollars, and 75 dollars respectively.

series 1 and series 2 coil looms 75 dollars each

Factory polished chrome door sills for 33 gtst, rare as shit from a robot and only the second set I have ever seen 200 dollars

series 2 engine loom 150 dollars

Greddy provec stage 2 boost controller 275 dollars

Complete mongoose alarm with remote locking etc. 275 dollars

33 diff 150 dollars.

drivers side headlight 150 dollars

fibreglass 33 gtr rear wing a few light scratches 125 dollars

RB 25 stock blow off valves X 2 40 dollars each.

Clear rear garnish 50 dollars.

Series 2 air flow metre 75 dollars

standard33 shocks with lowered king springs. these give a hell of a good ride. 250 dollars the lot.

Lower front control arms 100 dollars the pair

Front Castor arms with new red neoprene bushes 50 dollars the pair.

RB 25 engine mounts. Both the rubbers and the brackets 100 dollars the pair

More to come as the car is dismantled.

All items are in excellent condition unless stated. The prices are firm, I will post smaller stuff but unless you are prepared to pay me by the hour the larger stuff is pickup only.

My phone number is 0413 863207.

turbz was a special mate. built by chris from mtq and way too big for a 25. Its going on dano's 30/25.

rimz are Wed sports RS5's. some rash, not deep but plenty of and easily repairable. 235 tyres on 8 inch rims and Iwill let the whole shootin match go for 300 dollars. make damn good skidders as they are or have them refurbished by depalu or similar.

Plenty of japlish writing on them too. :huh:

haha turbo is way too big for my 20 then :cheers:

RS5s aren't really my bag unfortunately :huh: I'm sure someone will snap them up at that price though!!

Thanks for the reply. And does this fire sale mean no more Skyline? Or it's being replaced?

haha turbo is way too big for my 20 then :huh:

RS5s aren't really my bag unfortunately :( I'm sure someone will snap them up at that price though!!

Thanks for the reply. And does this fire sale mean no more Skyline? Or it's being replaced?

mate if i put the part out list for the wheelchair on here you would have a hearty. :cheers:

It will be buried with me.

This is a part out special to recoup some funds to run the chair . :huh:

fan shrouds x2 50 dollars each

Gunmetal grey 33 tail lights for 33 100 dollars the pair

tailshaft complete 100 dollars

clutch master. slave and clutch line 100 dollars




  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...