Jump to content
SAU Community

Recommended Posts

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

For a GT-RS on a RB25 it seems to be coming on fairly late at 3600rpm.

The peak looks about right so there is still room for more power earlier when that is sorted. I'd expect it to be all in about 500rpm or so earlier.

I think he is concerned that excessive blowby will develop if I go any further HP wise.

Apparently the standard exhaust manifold starts to become a restriction at this level too, ie excessive exhaust pressure/heat buildup. Correct me if I'm wrong.

dont think so dude... i had my old car making 290rwkw on the standard manifolds and it was all good... no catch can either :D

he must want you to have it as a precaution rather than anything else...

Edited by usmair
The manifold is not an issue at that power level.

I would have a look at the wastegate as a reason for the lazy-ish boost response.

So thats just a matter of fitting a tighter spring, right? Would the stock BOV have anything to do with this ie leaking?

dont think so dude... i had my old car making 290rwkw on the standard manifolds and it was all good... no catch can either :)

he must want you to have it as a precaution rather than anything else...

How long were you running that power level? How do you know you didnt have blowby if you didnt have a catch can?

I dont think you will get much more than 250rwkw out of a GTRS on a stock RB25. But it should have really good response.

If the stock bov was the issue you would have issues with high amounts of air not with response.

Mine GT-RS runs 256rwkw @ 14psi.

However, it has headwork, HKS cams, Plazaman plenum aswell.

Nice results! Bet you are happy. Gets boring quick tho :P

Edited by Granthem

Standard everything else, RB25, Powerfc, injectors, FMIC, exhaust, and GT3076 with 56trim, 0.6 comp cover, a 0.63 IW rear housing, 18psi of boost. Full boost at about 3100rpm.

314rwkw-2.jpg

3.jpg

Boost was on steady here to stop traction loss. Came on hard though, and at around 3000rpm as I said.

Set up the 3076 properly, and it will not be laggy.

Standard everything else, RB25, Powerfc, injectors, FMIC, exhaust, and GT3076 with 56trim, 0.6 comp cover, a 0.63 IW rear housing, 18psi of boost. Full boost at about 3100rpm.

Boost was on steady here to stop traction loss. Came on hard though, and at around 3000rpm as I said.

Set up the 3076 properly, and it will not be laggy.

Er.. while thats annoying to see it spooling earlier than my smaller turbo, its not entirely relevant now that I have a GT-RS :P

I am pretty happy with the way it drives though, much smoother coming onto boost.

Unfortunately after 6 months of being f**ked around by yellow sticker, getting hail damage, and having it stuck at the workshop for 3 weeks getting tuned guess what.. its been raining all day yesterday and today, which means I can't really test the acceleration properly.

since we're posting set ups...

heres mine... stock neo motor, un opened except for poncams type b's, has AM performance stainless steel steam pipe manifold with custom collector, 3076, tial 44 gate, fmic, 3.5 inch exhaust, nistune, 600cc injectors and runs 50/50 ethanol/bp98

img0106rr.jpg

running 16 psi too... its crazy to drive and is very VERY responsive. torque chart was on the wrong read out when they printed it but it makes around 550 nm torque at the wheels.

Check the wastegate preload SoFreshSoClean. If the actuator has some play in it, crack the 10mm nut and go a turn or two!

This wont need retuning because the AFM compensates for the extra air and adds fuel right?

Gonna have a look-see tomorrow. If its stopped raining. Which it hasnt. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...