Jump to content
SAU Community

Recommended Posts

Guest 33GTS25

this may be a tip that most people know but there will be some amongst us that dont know it.this tip was given to me by a mate who's dad used to own a car yard.

have you ever finished washing and polishing your car and stepped back to have a look at your baby but only to be upset that your tyres are dirty still and detract from the overall gleam. if so

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

be careful to not paint past the sidewalls and onto the tread pattern as we all know how slippery armorall gets.

hope this helps at least one of us.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/
Share on other sites

Guest 33GTS25

if its something really greasy why dont you take each wheel off and try to scrub it with laundry powder, the powders granules should help lift the grease without scrathing your sidewalls.

i.e wet the tyre first pour a little powder on the tyre and start scrubbing a 30cm section at a time this will give you an indication of how you are going before you atempt al the tyres

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10295
Share on other sites

pour a little armorall into a jar and brush onto the sidewalls using a small paintbrush i.e 1" brush(buy from crazy clarks for 50c). armorall will have the consistency of milk when painting but just keep walking around the car touching up as necessary. this will bring the tyres back to that shiny new look they had when you first bought them and when re-applied for a couple of coats the sheen just gets deeper without having to worry about runs etc that you get with tyre black(and its cheaper).

hope this helps at least one of us.

rod[/quote:d776b278ca]

Hey Rod,

How long does it usually stay black for? I used to do this but then found that it didn't last that long. I currently use hmm.. I can't remember what its called. Its made by Turtle Wax in a green bottle and it's called ***** Extreme. Pretty good stuff as it actually makes kinda like a silicon clear coat over the tyre hence not affected by water.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10296
Share on other sites

Guest 33GTS25

xrsist. i gotta admit that i dont know how long it lasts, as yesterday was the first time i have done it, but then it only takes 5 minutes to run around the car and reapply after you have finished your weekly wash/vacuum routine

i haven't seen this turtle wax stuff but it may also be a good option, remember that nothing will last forever though.

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10297
Share on other sites

Guest 33GTS25

jimbo, if your neighbours haven't commented yet on your dedication to your car then you are not committed enough.

other members of the complex that i live in know that i wash every saturday afternoon unless there is a cruise and i do it in the morning. the advantage of this is that they make sure there car is not in my way. it helps being a 6'1" black man sometimes :twisted:

you'd be surprised the many applications that washing powder has :wink:

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10299
Share on other sites

Guest 33GTS25

well jimbo you must have the rest of my body as i seem to be white from the waist down. i.e i think i must be hung like my mothers side of the family :lol:

if people comment on doing each wheel at a time, you should tell them that your baby is in foal and will be coming back with a godzilla, this will surely confuse them even further

rod

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10301
Share on other sites

nah Jimbo, it's just spray-on stuff! Very lightweight....sprays on like...errr for want a better word....hairspray LOL :lol:

Doesn't last very long tho - it's more just to pretty it up for the day, and it doesn't clean them either, you have to apply it to clean tyres.

Link to comment
https://www.sau.com.au/forums/topic/310-keeping-tyres-shiny/#findComment-10306
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...