Jump to content
SAU Community

Recommended Posts

will this fit my N/A r34 sedan??

http://cgi.ebay.com.au/WALBRO-FUEL-PUMP-Ni...=item23059f8795

also would 550cc injectors work well??

will the injectors that are labeled as "turbo" ones fit my n/a??

i know sfa about this sort of this so any info would be great!!!

cheers

Link to comment
https://www.sau.com.au/forums/topic/310055-will-this-fit-my-r34/
Share on other sites

why do you want 550cc injectors for your NA? do you have an aftermarket ECU to run them?

and that wlabro pump looks too cheap to be genuine

lol took the words right out of my mouth.

Edited by PSI-FED

may i ask why you want to upgrade them? is the old pump failing? if not then don't bother. neither a bigger fuel pump nor injectors will give you a power increase. unless you have a hell of a lot of work done (such as having a turbo fitted) then there is no need as you won't even be close to maxing out the stock ones.

Does seem a bit cheap for a Walbro. A Walbro GSS342 should be a direct replacement (done it on my R34 GT for the turbo conversion) but as mentioned already, why do you need bigger pump and injectors?

GTT Injectors are a straight swap on an RB25DE NEO. iirc they are around 370cc? which is enough for me to run a turbo at around 10-12PSI on 10:1 CR. Unless your looking to rebuild your engine, put on a big turbo, one that would even require ditching the factory AFM... you're not going to need those size injectors and even then a Walbro GSS342 is good for 500HP (or is it 550)? nuff said though, spend the money elsewhere unless this is part of a major upgrade :)

well im thinking of getting an APEXI fc +hand controller for my car... thats the reasoning behind it..

also anyone know who/where i can source one of these apparently they have been discontinued for the ER34's ?

Apexi Power FC should be fine as the car is manual and no longer needs the auto shift logic, and your replacing the ECU, not running a piggy back.

What are your long-term plans with the car? You would at least want to be working on the internals, upgraded camshafts, port polish, raise compression etc... to really take advantage of 550CC Injectors, bigger pump and a PowerFC... The cost of the PowerFC + Tuning = not worth it unless your at least fitting a snail

In that case buy your parts, but wait till your ready for it all to be put together before you start playing around with ECU's injectors and pumps. Only because it's unnecessary costs in labour and tuning, only to be retuned on the turbo conversion.

So to answer your question, a Walbro GSS342 is a direct replacement fuel pump, and R34 GTT Injectors will be a direct replacement, and will be plenty unless you want to go all out rebuilding your engine for higher horse power. Unless your able to get R34 550CC injectors at a really good price that's hard to pass up, then go for it, otherwise just stick with good 2nd hand GTT Injectors and you should be fine :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...