Jump to content
SAU Community

Recommended Posts

link works fine for me

click here

just look up the sections at the top of the main R35 page if you cant get the links going.

Maybe your browser is blocking things

strange i get this error when i click that link

"Sorry, the link that brought you to this page seems to be out of date or broken."

CBF!

dead thread. this thread is dead.

I have been reading too much Dr suess to the kids.

The Slotted rotors and MX72 pads went well at the track the other day. quiet as a mouse too during my daily commute.

keen to try the carbotechs though in the future.

the carbotechs will squeal like a p.ig with OEM, slotted or jhook rotors. However the jhooks do make a "clicky" noise with the jhook sliding/cutting over the pad surface, nothing near as bad as the carbotech squeal. FWIW, i've switched to the MX72's and personally i have found them very kind to rotors, virtually squeal free, cheap, probably 90% the performance of the carbotech xp12's - good for my requirements.

Edited by LSX-438

09 GTR and I tried the MX72's but at bathurst last year the front backing plate on the pads delaminated. They just couldnt handle the heat. Maybe it was the track?

I find the carboteks much better anyway than the MX72's.

If you order them yourself from the USA they are cheaper than the MX72's.

I can give you my contact in the US if you want it.

09 GTR and I tried the MX72's but at bathurst last year the front backing plate on the pads delaminated. They just couldnt handle the heat. Maybe it was the track?

I find the carboteks much better anyway than the MX72's.

If you order them yourself from the USA they are cheaper than the MX72's.

I can give you my contact in the US if you want it.

Interesting about the backing plate. I'll have to check mine out. I guess bathurst is anpother kettle of fish. FWIW we can get the mx72's for $699US a set.

Interesting about the backing plate. I'll have to check mine out. I guess bathurst is anpother kettle of fish. FWIW we can get the mx72's for $699US a set.

Thats a pretty good price. So converts to about $800 Aust delivered?

I can get the Carboteks for about $700 Aust delivered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...