Jump to content
SAU Community

Recommended Posts

Hey, trying to clear up some room, dads getting cranky.

1. adjustable rear toe arms - never used, only mounted. didn't go ahead with non hicas rear end. $90

th_Image0045.jpg

2. strength bar goes between rear toe arms - never used. didn't go ahead with non hicas rear end. $75

th_Image0046.jpg

or both 1 / 2 cause you use them together for $160

3. r32 or r33 radiator shroud - 32 good condition, 33 small crack in base. $20ea or offer

32. th_Image0049.jpg 33. th_Image0060.jpg

4. R32 gtst / gtr door trims - gtst discusting white trim, peeling. gtr good condition few small nicks from material (otherwise mint) $20 gtst $100 gtr or offers

gtst. th_Image0048.jpg gtr. th_Image0083.jpg

5. 32 / 33 manual tail shafts - got a 1pce for conversion $50ea or $80 both and get the yokes swapped.

th_Image0050.jpg

6. 32 gtst boot lid - has big rust spot where spoiler was, would be good to fix up - $30 or offer

th_Image0051.jpg

7. 32 gtst bonnet - needs respray, got gtr bonnet, good for cheap replacement - $30 or offer

pic can be seen above in item 6.

8. r33 front window whiper motor r32 rear window whiper motor, both unknown working condition, i asume they do - $15ea or offer

th_Image0052.jpg

9. 4 x 32 rear camber arm, 2 x 33 front camber arm, 2 x 32 / 33 front castor arm, 3 x 32 front camber arm, 4 x 32 rear castor arms - good for clearing defects. $15 pair or offer

th_Image0053.jpg th_Image0079.jpg

10. 32 front hub carriers - no bearings, good if car been hit in front - $20 pair

th_Image0071.jpg

Link to comment
https://www.sau.com.au/forums/topic/311502-skyline-garage-sale/
Share on other sites

11. r32 taillight garnish, no cracks - $10

th_Image0054.jpg

12. r32 rear gab shocks - have no idea about these, have some adjustment dial - $50 may be good to clear defect?

th_Image0055.jpg

13. 32 front LCA - $15

th_Image0056.jpg

14. 33 overflow and washer bottles - washer bottle missing cap - $10ea or $15 both

th_Image0057.jpg

15. parcel shelf vents - free.

th_Image0058.jpg

16. 33 condenser fan, missing top fixing piece, i just used screws - has been modified for clearance on fmic - $20

th_Image0059.jpg

17. 33 glove box - $20

th_Image0061.jpg

18. r32 rear lower trims, dirty as in photo, would clean up alright - $20

th_Image0062.jpg

19. 2 x 32 condenser fans - $10ea or both $15

th_Image0063.jpg

20. r32 center dash piece - $20

th_Image0064.jpg

Edited by 32_Dave

21. 33 condenser, should also have that ac canister thing, unknown working condition - $30

th_Image0065.jpg

22. 32 / 33 stalks - 33 $15 32 $10

32. th_Image0070.jpg 33. th_Image0066.jpg

22. 32 brake pedal - $10

th_Image0067.jpg

23. 32 / 33 steering column, with barrels / key, some bits missing - $30ea

32. th_Image0068.jpg 33. th_Image0069.jpg

32 are telescopic wouldn't be a bad one to try fit other cars :D

24. rb20 coilpack loom, missing one plug plastic - $20

th_Image0072.jpg

25. superpro 32 rear hub bushings - $50

th_Image0073.jpg

26. rb25 clutch fan - $50

th_Image0074.jpg

27. rb25 engine mounts - $50

th_Image0075.jpg

28. r32 castor brackets - $25ea or both $40

th_Image0076.jpg

29. selling for mate (tristan 32) r32 driver seat - $offers

th_Image0077.jpg

30. 32 interior lights - $15ea or both $20

th_Image0078.jpg

31. r33 fuse box its empty - $10

th_Image0081.jpg

32. 52mm ASI radiator fit 32 - $100

th_Image0082.jpg

33. R34 gtst passenger seat, mint condition - $50

th_Image0084.jpg

34. auto r32 ecu, will run a manual fine - $20

th_Image0085.jpg

35. Speedflow style fittings 2 x -12 90deg 2 x -10 90deg adaptors $10 a fitting

th_Image0086.jpg

36. rb25 valley cover, painted black - $20

th_Image0087.jpg

37. 32 lower silicone hose, 2" to 2" 90deg silicone intercooler pipe, universal pod adaptor - $10ea.

th_Image0088.jpg

38. 32 rear seats (coupe) mint as condition - $50

th_PA170002.jpg

39. 33 dash, has big hole in it, suit flock or make a mould for frp or carbon dash - $20

th_P8240003.jpg

40. 2 x 32 rear tailights , un garnished - $20ea. or both $35

th_P8240010.jpg

indicator is picture is sold.

41. 32 rear bar, needs respray - $40

th_P8240014.jpg

42. 32 gtst guard, small damage where sideskirt covers - $40

th_P8240015.jpg

43. 32 ac controller i think i have 2 - $20ea

th_P8240009.jpg

44. 33 ac setup - $20 the lot

th_P8240031.jpg

45. misc stuff - trims, rubbers, etc etc.

th_P8240008.jpg th_P8240006.jpg th_P8240007.jpg th_P8240011.jpg th_P8240005.jpg

all items are up for offers and or swaps to items of interest.

im a very negotiable dude and i needa clear some space / get some money back for the project.

cheers,

dave

Hey Dave,

What are those gauges mate? And is that pillar holder for a 32 or 33? Also, do you have 32 front window rubbers in that bunch of seals?

sorry john,

the gauges are sold as well as dual pillar.

what do u mean by window rubbers? the surround around the glass on the edges,? if yes im quite sure u can get a windscreen company out to replace them its under 100bux for memory.

in the pile there is:

- 2 x door rubbers

- 1 x boot rubber

5 minutes from kenmore 10 from indro. And its a gtst bonnet, please pm me for details

where exactly is this garage sale located, and ill buy your gtr bonnet but for 30 bucks or is that the both?

no deal man, only the incerts.

thought i said pm me, but must of forgott, sorry mate, for all other who are chasing pars, please PM me.

how did you go with the speaker grills mate?

SOLD

- bonnet

- ac controller

- 33 tail shaft

- 33 shroud

- front guard

- 32 pillar trims

- 32 ac fan box

- 32 silicone rad hose

- 32 rear quarter trims.

No longer for Sale

- 32 rad shroud

- 32 indicator stalks.

otherwise everything else still here.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...