Jump to content
SAU Community

Recommended Posts

ok so gonna do another photo shoot,

friday 19th march around 10.30 pm

will let you know where we will meet up at 1st, probably have a few different places.

looking under narrows bridge.

please feel free to byo camera and take photos as well,

if you have 31-34 4door (r31 please look nice!) but if u have GTR from the years 2000 and up be my guest :P

Link to comment
https://www.sau.com.au/forums/topic/311591-photo-shoot-friday-19th-march/
Share on other sites

yea stagea sounds good,

i tink ill change it to just skylines / stagea,

when parking try to park in groups to cars,

and is anyone intersted to doing a map maybe? and go to points to points? maybe a undergrownd car park, say garbos..

meet under narrows bridge, at 10.30 startin shooting at 10.15, please dont park under the bridge there is a car park next to it

Meet at 10.30 but start shooting at 10.15...?

sorry mate are u wanting 4 Door's only?

lol sorry i mean 1030 for a 1045 shoot! my bad.

and um under narrows near mill point yeah, there is car park on the other side

350z is fine and r31 is fine and ur c210 is fine too.. dnt be offended if you get asked to stay out for a few shots, but i will do singles and all that

thanks all for coming! was heaps fun.

was a few cameras out and about, be good to see what else was taken.

just a few photos, im puttin them on a flickr account so then ppl can get them as they wnt.

http://www.flickr.com/photos/48541315@N05/...57623654877260/

24785_10150167084595161_801230160_11528755_1525961_n.jpg

24785_10150167084720161_801230160_11528760_5758593_n.jpg

24785_10150167084990161_801230160_11528774_8005530_n.jpg

24785_10150167084110161_801230160_11528726_6866040_n.jpg

24785_10150167084185161_801230160_11528731_4541732_n.jpg

24785_10150167084665161_801230160_11528758_7492787_n.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...