Jump to content
SAU Community

Recommended Posts

Hello again peoples,

After saving a significant amount of cash for a Plazmaman FMIC kit, I have realised since getting my line back on the road that the part I'm least satisfied with is the suspension. I am now considering a set of Springs & Bilstein shocks especially now that I have stripped out the back half of the interior (which needs to be done to access the rear strut towers) to improve the ride & handing & maybe stop me hitting my head on the roof when I come across a bumpy road!

I have called Car Torque for a quote on the Bilsteins & some King springs, which all up came to $1290 (940 for shocks & 350 for the springs), which sounds reasonable for such a set up.

Does anyone recommend anywhere else I could get these parts? I did a search, but didn't turn up much.

Also would like to know if there is a suspension shop in Adelaide that people recommend (I don't know if people still recommend action suspension just going on previous threads), primarily if I bite the bullet & go get adjustable bushes as well. Going to need to find someone with a 10 tonne press before I get carried away there though.....

All comments welcome, cheers

Link to comment
https://www.sau.com.au/forums/topic/311756-suspension-retailers-serving/
Share on other sites

adjustable bushes dont really give you that much in the way of adjustability. either get plain old urethane bushes (or if youre keen, delrin) or adjustable arms.

Edited by scandyflick
Car Torque is the place you want to go, they did my Bilsteins cheaper than the sydneykid price. They do all the whiteline stuff to.

Refer to my original post....

^^ is that north tce hackney

Sure is :banana:

adjustable bushes dont really give you that much in the way of adjustability. either get plain old urethane bushes (or if youre keen, delrin) or adjustable arms.

Having done a bit more reading, I think I'm more likely to just go standard bushes for now if I get them, adjustable ones can also place un-natural loading on the arms potentially causing them to snap.

Definanately want to get the subframe alignment kit if I can for now.

don't forget to grab a front and rear sway bar if you can afford it. great bang for buck...

Yeah have been considering this too. Do want to experiment a bit & see how it feels just after a shock & spring change, but may do this also.

Prehaps I'll buy the lot & fit it in stages depending how hard it is....

Am also currently awaiting a call back from Manta about the shocks & springs. Will be interesting to see what price they give me.

Yeah doesn't hurt to shop around though. Have found out that Autosport Direct has got direct contacts with Gary (Aka Sydney Kid) & is also going to get me a price for the same package.

Manta called me back today just to let me know they were so busy they forgot to get me a quote Lol. Was nice of them to let me know just the same.

  • 3 weeks later...

Just an update on this.

I got a quote back from Manta, without actually stating the amount I will just say it was significantly more than Car Torque.

They also would have to be ordered/built first in Germany, no stock what so ever & at least a 6 week wait!

I will say they were the only ones who actually called me back though without me having to chase & they're not exactly short on business so it was nice of them to get back to me.

Also the lead with Autosport turned out to be a dead end, Gary (aka Sydneykid) doesn't supply these kits anymore period.

So Car Torque it is :cool:

Edited by J_Red33

Wasn't a coil over kit, nor that extreme in price, but were still talking hundreds of dollars extra. Just the standard Bilsteins with King springs same as what Car Torque was quoting on.

Nothing against Manta, they almost sounded like they knew it was a bit expensive, possibly because they would be a special order, where as Car Torque can get them from Sydney within a week.

Edited by J_Red33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...