Jump to content
SAU Community

Recommended Posts

Hi all. When I was driving around yesterday in the hot weather there was this pinging/rattling type noise coming from the motor when I was flooring it. Its never really done this before and I was wondering is this what "knocking" is? Is this caused by hot weather? I have an SAFCII but the knock has always remained on 0 which leads me to think I have not wired this part correctly.

Also, my brakes seem to be wearing thin. What is the part number for just the standard run of the mill brake pads or where can i get them from.

Thanks all

Andrew

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/
Share on other sites

Without going for a drive with you its hard to say 100%, but I'd be pretty sure the engines detonating. Its sounds like marbles rattling around or a loose screw rattling around. I would say with the extra heat, the safc2 leaning the fuel mixture out and using a stock intercooler the car's detonating. Basic fix dont thrash the car in the heat or richen up the fuel mix.

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/#findComment-629835
Share on other sites

yeh thats what the sound was like. I had been driving reasonably hard for a while in the heat. Guess it twas just the hot weather. The car was normal again this morning.

THis might sound stupid but detonation is knocking right?

Good place for purchasing brake pads for R33?

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/#findComment-629878
Share on other sites

Yup - detonation = knocking... detonation is NOT your friend. It is not a GOOD THING (*TM). If you hear this noise you should stop accelerating immediately. Detonation causes all sorts of problems, to mention a few - blown plugs, broken ring lands, melted pistons, burned out exhaust valves etc....

Brakes pads for an R33 - talk to Perth Brake Parts. Use Bendix Ultimate - nothing less or you will be dissapointed.

This has been a community announcement fuelled by red wine - not to say that the information is inaccurate, cause I know through experience on both counts that I'm correct! I hope it has been helpful. :D

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/#findComment-629909
Share on other sites

Hi Andrew, I was sure we hooked up the knock sensor correctly, but I guess we never checked to see if there was any output. Definately sounds like knocking, most likely cause by heat soak into the intercooler, with the intake temps rising causing the pinging.

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/#findComment-630234
Share on other sites

Bendix ultimate $70  :(

Woah! Where are you getting them at that price? Maybe they're cheaper for an R31? 1st set I bought were round $120 from Perth Brake Parts. Second set I got for a shade under $100 through a mate's work account at Coventrys.

BTW - just put on a set of DBA slotted rotors. Made a HUGE difference! :)

Link to comment
https://www.sau.com.au/forums/topic/31190-hot-weather/#findComment-632368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...