Jump to content
SAU Community

Recommended Posts

As a mechanic I see there point on carburettored cars ... as they do tend to get fuel saturation over time due to being directly above the carby ...

On a fuel injected car however I do not see this as a problem as the fuel is injected at the manifold and not directly under the airfilter like on a carburettored car and if they missfire it doesn't fill the intake with fuel mixture it only enters a metered amount at a time due to how a fuel injector works

In my experience Gas vehicles with the regular vapour style with a converter and mixer setup on them are far worse even with panel filters ...

I had one at my workplace crank crank crank and not fire first go then switched the ignition off ... ( in this time the whole intake tract is full of gas ) then you go to crank it over again and what happens all that gas in the air tract ignites and sets the airfilter on fire and goes off like a bomb and tends to blow airboxes apart ...

  • 2 weeks later...

2 years ago my best friend perished on our roads. The paramedics and emergency services on the scene said it was one of the most horrific pod filter accidents they had ever witnessed, I still think of that accident every day. I can still remember him screaming. The people who were there said my friend died instantly when the pod filter initially exploded. They said it was me that was screaming.

I still don't see how a paper or foam/mesh product could explode and cause death inside a sealed engine bay. There must have been many factors at work. Could you go into some more detail so we can get a better understanding how this accident may have occured.

I will probably be moving to a enclosed pod enclosure soon, so I am very interested.

The exploding pod filters are rip off from fast & furious.

The whole making fun of people dying in an accident may still a little too early considering the horrific crash only a couple of weeks ago. So good on you crackhead for making fun of such a shit situation.

http://cgi.ebay.com.au/AIRBOX-Nissan-Skyli...=item2eab339198

If your that paranoid just buy one of these Airboxes

I believe there available for most skylines

melly has one of those pod filter covers in her car and the car is registered in NSW and it passes, needed the cover to pass rego

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...