Jump to content
SAU Community

Recommended Posts

inletside.jpg

Very nice intake plenum and has the provision to run two fuel rails (12 injectors) currentley runs one rail, save yourself some coin.

HKS rail (not shown) is brand new and never used.

$800 or best offer for pair

will sard injectors fit in the provided fuel rail?

mite be interested in both

also do these plenums realy make much of a difference over a standard 1?

ive read alot of posts where people say that they dont

will sard injectors fit in the provided fuel rail?

mite be interested in both

also do these plenums realy make much of a difference over a standard 1?

ive read alot of posts where people say that they dont

Sard injectors fit no dramas. Depends on your turbos, we have back to back comparo with the stock plenum and the K5-660R and @ 400rwkw the EGTs were far more consistant between cylinders with the greddy, i have refitted the smaller rear turbo housing so power will be down to around 350rwkw and at that power it is overkill... plus it is too slightly too big for the s13 engine bay.

  • 2 months later...
  • 4 weeks later...
inletside.jpg

Very nice intake plenum and has the provision to run two fuel rails (12 injectors) currentley runs one rail, save yourself some coin.

HKS rail (not shown) is brand new and never used.

$800 or best offer for pair

how much for hks rail

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...