Jump to content
SAU Community

Mr Rann At Gilman

Minibats

By Minibats,
in South Australia

 Share

Recommended Posts

dark.sky Grand Master

dark.sky

Posted
Posted

Right next to the Speedboat Club.

Heaps of you guys have been to my house before, think about where my house is in relation to AIR/Speedway, because I can hear the sprint cars from here. Having said that, its only in certain weather conditions and Ive never heard it inside the house.

Having been to the proposed location, I would be suprised if it failed. TBH I reckon Taperoo and Osborne would be more likely to hear it than the port, but the prevailing wind comes from the SW, so it would blow the sound over water towards bolivar...

RubyRS4 Grand Master

RubyRS4

Posted
Posted

The EPA allow certain noise levels above ambient noise. So a drag strip may be loud, but can still be approved with the right buffer zone and noise level buffer above ambient.

:cool:

J_Red33 Experienced

J_Red33

Posted
Posted

^^ If the speed boats are making that much noise on a regular basis, surely it's not that big a deal for drag racing to occur once a month, especially with the sound barrier that would be around it.

Really want this to happen as well, would be nice just to take my line down to a drag strip just to see what it does. Not that I'm expecting heaps.... still would stop me being curious.....

Dohmar Grand Master

Dohmar

Posted
Posted
^^ If the speed boats are making that much noise on a regular basis, surely it's not that big a deal for drag racing to occur once a month, especially with the sound barrier that would be around it.

Really want this to happen as well, would be nice just to take my line down to a drag strip just to see what it does. Not that I'm expecting heaps.... still would stop me being curious.....

Personally I'd like to see the event be open every Friday and Saturday night, since those are the two days you really want to let off steam and go party - would be good if they were able to build a petrol station right outside the venue too, with e85, methanol, lpg, 98 oct, diesel, nos etc etc

-D

Dohmar Grand Master

Dohmar

Posted
Posted
sydney has wednesday night drags air used too as well

for sure, they have to have some kind of regular weekly events to justify the cost being spent on it - whats a speedway's use when its closed? bugger all eh, as we've found out since AIR closed...

they'll have to have some kinda schedule, keep the noisiest events for the daytime or during the weekends and then have general stuff like grip/drift prac during week nights - Im sure many people here would be weekly participants

-D

J_Red33 Experienced

J_Red33

Posted
Posted
Personally I'd like to see the event be open every Friday and Saturday night, since those are the two days you really want to let off steam and go party - would be good if they were able to build a petrol station right outside the venue too, with e85, methanol, lpg, 98 oct, diesel, nos etc etc

-D

Yeah would be good if it ran street meets fairly regularly, would come down to the amount of people turning up I guess & how much some locals bitch & moan if noise does turn out to be an issue (there always has to be one or 2. I wouldn't think there'd be a shortage of willing participants.

Dohmar Grand Master

Dohmar

Posted
Posted
Yeah would be good if it ran street meets fairly regularly, would come down to the amount of people turning up I guess & how much some locals bitch & moan if noise does turn out to be an issue (there always has to be one or 2. I wouldn't think there'd be a shortage of willing participants.

even if they had just a petrol station/ cafe-restaurant-diner / car wash / car park it'd be an ideal place for people to meet

provided the law respects the venue for what it is and doesnt simply use it as a cash net - this is dependant on what mister premier says too

thing is, you get the stuff that people want to have around for their cars ie petrol, a place for them to clean it, catch a bite, maybe even put in self serve garages with hoists similar to the rentable garages at lala...

possibilities are endless

-D

DIOR 33 Veteran

DIOR 33

Posted
Posted
Right next to the Speedboat Club.

Heaps of you guys have been to my house before, think about where my house is in relation to AIR/Speedway, because I can hear the sprint cars from here. Having said that, its only in certain weather conditions and Ive never heard it inside the house.

Having been to the proposed location, I would be suprised if it failed. TBH I reckon Taperoo and Osborne would be more likely to hear it than the port, but the prevailing wind comes from the SW, so it would blow the sound over water towards bolivar...

that would be a great location for the track

Im down near pelican point road and we can hear the speed boats on the weekends very clearly most events, thing is I can put up with the odd event of drags or race cars.

Most of you know where i live and i hear the speed boats very clearly but i wouldnt care if i heard drags ect, its not like it would be after midnight and it would be on weekends

Its no different to the drag strip on victoria rd anyway lol

Dohmar Grand Master

Dohmar

Posted
Posted
that would be a great location for the track

Most of you know where i live and i hear the speed boats very clearly but i wouldnt care if i heard drags ect, its not like it would be after midnight and it would be on weekends

Its no different to the drag strip on victoria rd anyway lol

thats so true. 12pm is the curfew for most noise, and I believe private parties are able to continue to 3am in most suburbs depending on noise levels of course

if this was to go ahead, id be seriously considering investing in some kind of small business like a cafe/car wash venue.... could even have a bunch of simple 8x4 portable rooms leased out to the assorted car clubs across sa, ie the evo grp, hsv, sausa, supra grp, porsche club etc

would be an excellent alternative to renting out private property around the suburbs

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      R34 GT-T cycling ABS pump

      By Kinkstaah · Posted

      Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...