Jump to content
SAU Community

Recommended Posts

Could be a stuffed wheel bearing. I'm in the process (quite literally as we speak) of replacing my front ones because of much the same problem.

Did you get the rear wheels alligned too? Remember these cars have four wheel steering...

Could be a stuffed wheel bearing. I'm in the process (quite literally as we speak) of replacing my front ones because of much the same problem.

Did you get the rear wheels alligned too? Remember these cars have four wheel steering...

ok i'll give it a try and keep you posted on results, got to find time...

Thanks for the help

spacers? not too sure, will find out, they are aftermarket wheels

They are new rims, will get back balanced too

Thanks

Edited by Rbsushi
how long were the tyres unbalanced for?

if the tyres have been run unbalanced for a while they wear in a way that, when rebalanced, they unbalance themselves again

urgh and by unbalanced i meant out of alignment, shouldn't post when tired

I got new tyres yesterday, balanced and aligned, front and back.

after 1 day my steering tremors are back @80km/h, I'm going to change caster and sway bar bushings, cause mine are stuffed and get aligned again and see how that goes.

Take a look if your bushings need to be done.

that should only affect it when you put the brakes on. i had a magna that kept warping the front rotors every few months after getting them machined. they were really really bad. even at 60kmh by the time you had gotten down to 50kmh the vibration would be shocking and by the time you stopped it was ridiculously bad, but it never affected how the car drove when you weren't touching the brakes. ended up getting new rotors and it didn't warp them anymore.

I too am going for the bush route now because I've replaced wheel bearings and alligned/balanced everything so I can only put it down to the other weak link in steering gear; bushes. Either that or the mob who did my alligning/balancing did a shit job.

  • 2 weeks later...

I had to get mine balanced/aligned twice cos the first did indeed do a shit job, so don't take it back to the same place the 2nd time, likely they'll do a crap job still...

The only company that does good aligns seem to be Tyrepower and Beaurepairs from my experience.

I found out that my suspension is stuffed, crappy ones through pedders, new but now pretty much throw away, bad mistake, and all my bushes need changing. So off to fulcrum suspension, where I'll get some tein suspension, shocks etc; put in and replace the bushes with fulcrums polyutherine bushes.post-63012-1272202781_thumb.jpg

But now with the accident today, it's all been put on hold, man whats next.............

:P

I found out that my suspension is stuffed, crappy ones through pedders, new but now pretty much throw away, bad mistake, and all my bushes need changing. So off to fulcrum suspension, where I'll get some tein suspension, shocks etc; put in and replace the bushes with fulcrums polyutherine bushes.post-63012-1272202781_thumb.jpg

But now with the accident today, it's all been put on hold, man whats next.............

:)

Did the suspension contribute to not pulling up in time - out of interest?

Insurance job (even tho' it looks as if you'd be paying Excess)?

Hope the car is all good pretty soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...