Jump to content
SAU Community

Recommended Posts

hey guys not sure if this is the right place to post this but i have recently picked up my R34 GTT with very minor modifications to the engine and for some reason for the past 3 days in a row as i am driving or stopped at traffic lights it has seems to stall...

at first i thought typical RB (random bullshit) ;)

but now im not sure. i know the batt is on its way out but i didnt think that could make it do this??

it on has a KN air filter on it and thats about it...

any help or ideas or if this has happen to anyone else please let me know.

thanks heaps in advance for any advice :)

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/
Share on other sites

Do you have an aftermarket atmospheric blow off valve? Put the stock one back on and your problem is fixed.

Or try cleaning the AAC(Auxiliary Air Control) valve... it bypasses some air through when your foot is off the throttle.

And maybe clean your air flow meter with some electrical contact cleaner.

There is a tutorial on how to clean the AAC valve in the DIY section of the forum, just search.

Edited by SKYRYAN
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5159213
Share on other sites

How do you know the battery is on it's way out? Could be the alternator...

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :D

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160944
Share on other sites

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :(

Very true.

If the battery is dying that could well be a symptom. Check the battery and alternator with a multimeter, make sure you aren't missing any volts between the alternator and the battery. If there are more volts at the alternator then there are at the battery, check your earth and positive wiring, could be a bad connection or corrosion.

Alternator should be producing 14.2v while charging

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160976
Share on other sites

^^^ thanks for your thoughts, my fiance got home last night and the batt terminal for the power was corroded, so he cleaned it up and it found to be loose so that would explain things. it hasnt missed a beat today which is great :(

as for the wheels they came with the car, dont worry in the future there will be some jap rims on there :D

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5161274
Share on other sites

well here is an update. it was fine for nearly 2 days because he cleaned the terminals and tightly sercured the terminal as it was a little loose after getting rid of the corrosion and then last night as we were going for a drive it happened AGAIN :(

we were travelling at 60 in 5th in a residential area and then all of a sudden the car lost a little bit of power and the slip light came on.... but it was only that light!! it was weird cause we have already been driving for at least 1 or 2 hours...

any light in this would be great, now i know the batt is still not the best but thats getting replaced next week.

thanks guys :P

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163318
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163437
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Edited by dose_it
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164629
Share on other sites

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164816
Share on other sites

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

I'm a muppet am I? Who cares If someone built my car it's a cefiro good luck findin a stock one and I'd hardly call it built when it's got a 250 horse sr20 coilovers and a bodykit that just manages to chirp 3rd. Ha yep that's it I just spend hours cruising from lights to lights hoping to race standard skylines I was honestly to busy perving on ur ex missus.

But seriously who cares if she has chrome wheels. Ur the only person who can relate a stall problem to rims so maybe in reality your the muppet

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...