Jump to content
SAU Community

Recommended Posts

Proof that you have no life/can't get a missus. I win.

/endthread

Back on topic.

been in a relationship for past 16 months cause I can make my relationships work. So u don't win shit

anyways leave the chicks rims alone. You should no women are materialistic and like big shiny things.

Hope u sort out problem keep us updated

I had a similar issue in my 34, cleaned the AAC and thought it fixed it, came back a few days later, eventually replaced the battery cause the old one was dying and it hasn't happened yet, so seemed to have been a bit of a combination. Have you changed the bat. yet?

ok so update :P the batt kept getting worse and worse, and so jump starting was becoming more n more,

finally changed batt yesterday to a yellow optima and now everything is awesome. im guessing the batt was a coupke years old and it was still from the motherland...

havent had any dramas yet. thanks for all your help and im sure if we get stuck again we will ask again :D

Just be aware that this happened to me as well, i replaced the battery and everything was good for a couple of months. Suddenly my new battery is doing the exact same thing as the old one, and this time i know it isn't the battery because it is brand new. So just be on the lookout for signs and symptoms that it is happening again.

Best of luck with it though, hopefully in your case it was just your battery :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...