Jump to content
SAU Community

Recommended Posts

I drove my car down the coast recently, the stock lights are not that great at all in the dark. All I'm after is some bright light, so would be after a 4300K kit.

My question is, how do the N1 headlights cope with HIDs? Is the glare and cut off terrible? Would a low heat kit help the level of light?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/316112-hids-in-n1-headlights/
Share on other sites

Heat and kelvin rating are often misunderstood.

Kelvin rating is the measurement given to the colour of the light. The higher the Kelvin rating the bluer the eventually purple the light is. The heat given off the HID bulb is actually a little less than halogens.

For reference 5000k is the colour of daylight. And one of the most brightest.

4300k is also bright and gives off a nice white colour with the slightest of yellow hue.

To answer you question about N1 headlights. The cutoff wont be as good as a projector style headlight but will be ok if you adjust your beam accordingly.

PM me if you need to source one.

Hey why don't you just put in something like a Narva Blue Power.. These have a Kelvin of 3750 and a Lumen of 2000 so the have 80% more light and 20% whiter Light

And unlike the HID's they are 100% ADR approved. I have these in my daily and beleive me the are twice as good as the stock ones and also look great with the white light.

Or

If you don't mind spending more money (no point on my daily lol) then the Philips Blue Vision is the way to go also ADR approved and have Kelvin of 4000.

Now they are no where near as good as the Factory fitted Xenons i had in the GTT but they are legal and trust me they are not far off.

If you are interested here is a link to the reasons you should't install HID's in normal headlights. (apart from having driver respect)

Link (WHY NOT TO INSTALL AFTERMARKET HID's)

Edited by 99 GTT

Dave, thanks for the clarification, I obviously didn't understand what I had read. The info is great too, thanks.

Andy that is awesome, cheers. I'll look into that for sure. I'd only be after 4300k HID (although 5000k would be best if possible) so 4000k would be sweet.

I had a Series 3 R33 GTR and that had such sweet lights, the cut off was awesome. So these seem terrible in comparison.

Not a problem... hope i did't sound to bossy in that post lol.. let us know what ya do hey and maybe even some before and after pictures.

Phillips do a 5000k globe called Diamond Vision but keep in mind just like the aftermarket HID's no ADR LINK

Phillips Xenons are only 4200k but they are 300% brighter then normal globes Link

Let us know hey :blink:

Edited by 99 GTT
  • 2 years later...

99 GTT, How do you know that the Narva Blue Power and Phillips Blue Vision have 2000 lumen or less? Did you find the specs somewhere? Can I have the link?

I was looking for bulbs with 2000 lumen to put in my car. Thanks.

Hey why don't you just put in something like a Narva Blue Power.. These have a Kelvin of 3750 and a Lumen of 2000 so the have 80% more light and 20% whiter Light

And unlike the HID's they are 100% ADR approved. I have these in my daily and beleive me the are twice as good as the stock ones and also look great with the white light.

Or

If you don't mind spending more money (no point on my daily lol) then the Philips Blue Vision is the way to go also ADR approved and have Kelvin of 4000.

Now they are no where near as good as the Factory fitted Xenons i had in the GTT but they are legal and trust me they are not far off.

If you are interested here is a link to the reasons you should't install HID's in normal headlights. (apart from having driver respect)

Link (WHY NOT TO INSTALL AFTERMARKET HID's)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...