Jump to content
SAU Community

Recommended Posts

Why is the deal with japanese drivers and hazard lights?

Over here you generally only put your hazards on when your car has broken down, but the japanese love using them at every available opportunity.

Is there some sort of etiquette reason or something? I'm curious!

Link to comment
https://www.sau.com.au/forums/topic/316143-japanese-drivers-hazard-lights/
Share on other sites

Its the more intelligent japanese drivers way of telling you that they are...

Talking on the phone.

Having a sleep in the car.

Putting on makeup.

Stop outside a shop where there is no parking allowed.

There's something good on tv and they have stopped to watch it.

They dont know where they are.

The list goes on and on..

Usually you will find them stopped in the middle of the road on a blind corner with hazards on talking on the phone and a parking bay less than 100 metres away...I could go on all day !!

What they generally dont use it for is for emergency situation.

Japanese people are usually very considerate when doing something which is not driving in they lane they are occupying they will give warning via flashing hazards- just courtesy, shame we dont all try as hard to be as polite to others on the roads in such circumstances

hahah i hired a car in japan when i was over there, and i noticed that they used thier hazard lights all the F***ing time LOL

if i let someone in to my lane, or gave way to them, it seemed the flash of the hazards was a "thankyou"

every car stopped out the front of 7 eleven or any other shop on a main road had hazard lights left on

....

the other thing i found strange was; at an intersection there would be a red light... but at the same time, there would be a left green arrow, right green arrow and straight ahead green arrow .... so what is the red for? i assumed it was red for u-turn... because thats about the only thing there wasnt a green arrow for lol

The japanese sure are a funky bunch. I was in Osaka a few years ago, and I didn't really notice the hazard lights etc. I was too young to drive then though so that's probably why.

they are used quite often if someone pulls out in front and there may be a need to break. the driver usually flashes them to either apologise and or make the people behind aware. also the above

yep, that's my experience too.

I would say they are most often used as a 'thank you' or an 'excuse me' depending on what exactly the motorist has done. a thankyou when you let someone in in front of you. an excuse me when they just push in front of you.

many times if there's been an accident on the freeway as drivers approach they'll put on their hazards to warn drivers behind them that they are about to have to brake from 140kph down to 20kph. it's a good idea and usually as one driver sees the hazards in front and starts to brake then he'll put on his hazards and so on down the line.

they are also used as a 'don't mind me, I'm foreign' signal when say you are white and in a hurry and run a red light with no one coming the other way, or park somewhere you are not supposed to etc.

basically used to let people know you are currently doing, or about to do something dodgy.

of course people use them here when stopping somewhere hazardous to talk on phone etc.

the main difference I've found is the 'thank-you'/'excuse me' usage and the 'sudden braking ahead' usage. that is never done in aus. most of the others people do here too.

waits for someone to start a thread about japanese drivers / turning their lights off when coming to a stop at traffic lights :happy:

so i can tell my story about a trip back home and doing this force of habit and explaing to oz police about why i did this . . .

yeah, that's another good one and a great courtesy.

I'll spell it out for those that don't know.

in japan, when stopped behind another car at night at traffic lights it's considered polite to turn off your headlights. I mean, you don't need them while sitting still do you? and the front car usually (not always) leaves their headlights on so no danger of head ons etc.

I have even heard of a device that dims lights from regular beam to just the running lights/parkers when the car is stationary.

I can imagine after years in japan it'd be a hard habit to break. It is nice though. I mean who wants some clown in a civic with his 10jiggawattt HIDs illuminating my car and my mirrors from behind whilst I'm waiting at traffic lights?

I have even heard of a device that dims lights from regular beam to just the running lights/parkers when the car is stationary.

Is that why my Skyline has a light reduce switch that reduces the light to parker when at a stop?

haha @ beerbaron's civic scenario

or in australia's (particularly western australias) case where EVERYONE has a 4wd / crossover shaped / car whos lights point directly at the car in front of their's mirrors - and thus into the drivers eyes

i am (obviously) in WA and i use my hazards all the time a-la japan... i got the coutesy factor from malaysia however, they drive also on their freeways with them on to let other cars know that it's "ok to pass/overtake" but i personally switch hazards on whenever i see cars in front of me braking hard so that drivers behind me know a traffic hazard is coming up, or cat runs across road / drunk stumbles onto street / tree arm laying across road etc for cars behind that may not see it... i really should move to japan i think...

come to think about it... i first noticed when i was walking out of odaiba super autobacs that the cars at the intersection had switched thier cars off while waiting for the lights to change... seems a bit random!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...