Jump to content
SAU Community

My New Gts-t R33

alex690

By alex690,
in Engines & Forced Induction

 Share

Recommended Posts

alex690 Newbie

alex690

Posted
Posted

Hi guys im fairly new to skyline australia and turbo cars in general.

I picked up an r33 series 2 last week and i was just wondering what mods to start off with and what sort of power gains they will give me. I've been told fuel pump, intercooler and a turbo back exhaust.

Any other mods good to start off with?

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/316834-my-new-gts-t-r33/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Hi Alex.

Welcome to the forum.

You should take the time to read the FI Guide:

http://www.skylinesaustralia.com/forums/Fo...ick-t66556.html

It has a lot of good/basic links for beginners... specifically this thread... "What mods to do first"

http://www.skylinesaustralia.com/forums/fi...-co-t45218.html

Should the above not be enough, please feel free to have a crack @ the search button - there is literally months of reading you can do.

Cheers.

tridentt150v Grand Master

tridentt150v

Posted
Posted

Another thing I'd suggest [if you want to learn] is to find your local SAU club and join up - in between teaching you bad habits, they might also drop a few pearls of wisdom.

Another good way is to find a reputable skyline workshop in your area and become a serial pest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...