Jump to content
SAU Community

Recommended Posts

Hey All,

The dash lights on my R34 GT-T seem a little dim, Does anyone know a way to make them brighter as I can't find the usual toggle to turn the dash lights up, like on other cars. Thanks

:( I don't think there is one , I've been after trying to get my daytime climate control and stereo lights brighter with no luck they'll come good in a car park thats dark but dim back down as soon as I'm in the sun, covering the dash sensor makes SFA difference in sunlight , there must be another sensor/s somewhere --it's friken annoying. :( if you do find out please post.

During compliance the dimmer that gets fitted (sometimes) is tied up under the steering column, I found my one there.

Just checked under the steering column, took orf the lower panel just to be sure it wasn't lurking and nope, I did however find all the alarm wireing that is hooked into the ignition like a bunch of demented spagetti so I tidyed that up so it wasn't a totaly wasted excercise, there were a couple of unused sockets that looked likely but I'm no auto sparks so WTF they are for I'm stuffed if I know , I need to see one thats already hooked in there to know wtf socket I'm looking for.

:)

During compliance the dimmer that gets fitted (sometimes) is tied up under the steering column, I found my one there.

This man sells LED dash replacements and he should be shamelessly plugging them too.. shame on you dan, for shame

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...