Jump to content
SAU Community

Recommended Posts

So i just got my own R33 a couple of days ago and noticed that nobody has done this yet (somebody had done it for the 180sx i had before)

In light of that and the fact i had nothing better to do, i recreated the fuse panel sticker in english.

It is also the same dimensions as the original sticker, so you could just stick this over the top and never have to worry about searching for a translation again.

(if you don't know how to print it at 100% scale, just put the pic into a word doc and print, should be the right size already.)

There is also an inverted version available, for those who prefer to read black text on white background.

Fuse Box Sticker

Fuse Box Sticker (inverted)

If anyone wants the same thing done for another car (R32, R34, Alfa 33, Other...) just PM me.

Link to comment
https://www.sau.com.au/forums/topic/317243-r33-fuse-box-sticker/
Share on other sites

i paid $11 or $12 from memory, could have stolen the picture and printed it out but then i would have had to of gone and bought some sort of sticker paper and then a printer or gone to a friends and used there printer, in the end it was either hours of running around or 30 seconds + $12 and it was delivered to my door, maybe you like f**king around and wasting time to save a couple of dollars but i have better things to do.

Print + 4 little bits of blutac == Win in 2mins.

I know some people like to have it looking far more professional, but for the average person, how often do you look at the fuse panel?

Print + 4 little bits of blutac == Win in 2mins.

I know some people like to have it looking far more professional, but for the average person, how often do you look at the fuse panel?

I guess im not that much of a tight arse.

You have to be a tight arse to save money?

So when you go shopping you choose the most expensive of everything because you don't want to be a 'cheap arse' and save some money?

If it was like $2, i probably would have taken the Ebay option, but I did it because it's giving something back to the community. I am trying to learn Japanese, so this was just a fun exercise for me that had an extra benefit to other people. I'm sorry i like helping people (o.0)?

I'm not saying everyone HAS to print out the one i created. Unless you are the Ebay seller and you are crying because of hurt sales (which i doubt there would be much), i say why are you complaining?

You have to be a tight arse to save money?

sometimes its worth spending a few extra dollars to do the job the first time and save a lot of hassle, as i also mentioned earlier i didnt have a printer at the time, but even now i would just buy the sticker.

Unless you are the Ebay seller and you are crying because of hurt sales (which i doubt there would be much), i say why are you complaining?

Im not an ebay seller and where exactly do you see me complaining?

Well i assumed the moment you resorted to swearing you must have been rather annoyed at something.

And i save money where i can, sticker Vs. paper for a fuse panel isn't system critical.

If i were buying say a turbo, then i know to stay away from Ebay for starters and the 'too good to be true' rule applies.

Also, thank you very much for your continued replies, i now have over 10 posts :D

Not system critical so who cares..

Try not to shoot those that try to help anyone regardless of cost.

Sounds like someone has got their period....

It's not critical so who cares? Seems you do otherwise you would not have bother posting anything but of course you think that everyone needs to hear what you have to say.

And if I had my period you would have known about it

  • 2 weeks later...

tiberis,

is there anyway we could talk you into translating the characters on the main fuse and relay box in the engine bay and maybe the characters on the sunvisor on the drivers side. been wanting that for the last 10 yrs.

cheers

norty4 :cool:

Edited by norty4

i'd be more than happy to give it a shot.

i can do the main fusebox/ relay box for the engine bay for a R33 easy enough seeing as thats what i have. If you wanted it for another model i would need 1 (or many) photo(s) of the panel to translate.

likewise, the prev owner for my car (who i'm finding out was a bit of a twat) has ripped off the notice on the sun visor in my car, so i would need a photo of that as well.

the higher the resolution/ size of the picture the better.

either PM them to me or post them here and i will see what magic i can work.

  • 11 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...