Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

$4200 for the normal ones, TE37 SL $3300 delivered!!!

Remember these new TE37 SL is STRONGER & LIGHTER

sounds great.

have you got any details on exactly how much these wheels weigh?

cheers

ooooooohhhhhhhh :ermm::);):D I want I want I want.

18 x 9.5 ( Front ) 18 x 10 ( rear ) offset + 15

I think/hope this should be a good offset for a 34 GTR .... Will drop in on Tuesday afternoon with a deposit and hopefully some reassurance that the sizes and offsets will be correct.

am I on the right track with sizes and offsets anyone ???

gtr needs same width of rim so get them both 18x10 in what ever offset

they need to be the same so u dont f*k up ur attesa system

I always thought it was the rolling diameter of the rims/tyres which needed to be the same and that width did not matter. Obviously if the rolling diameters are different the atessa will be detecting what it thinks is wheel spin.

Any ideas anyone ? Also on the offset +15 good or no good for 34GTR

sounds great.

have you got any details on exactly how much these wheels weigh?

cheers

Anyway in terms of weight, i found out they are 1 pound lighter per wheel (vs older te37's) which is almost half a kilo, which is good.

+15 is going to look great, go for the 18x10 front and rears :)

Many thanks for the advice N1GTR .... I will order the 18 X 10 +15 Do you know if I Will I be able to run those sizes and offset without any guard rolling etc..... ?

interested in staggered

10.5 and 9.5 (+22 all round)

delivered to sydney.

have to ask ..any chance of custom colour ,black????? extra cost??

$3300 +$80 delivery if in metro of Sydney.

Sorry no chance of custom colour, if you want custom colour then you can go for the normal TE37 for around $4400 :D




  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...