Jump to content
SAU Community

Recommended Posts

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

I just got mine fitted today. I got 19x9.5 +22 at the front and 19x10.5 +12 at the rear. They pop out a fair bit at the rear, I figure once I put some coil-overs on and drop it a little they should camber in and sit a little more flush. Either that or I put some spacers on the front.

Pretty happy so far, I do wish you could fit centre caps to them though.

post-77856-1291273819_thumb.jpg

post-77856-1291273900_thumb.jpg

hey ken i need a package for my r33 GTR, 19x10 or 19x10.5 with tyres.

can you give me a qoute ? thanks

Can do 19x10.5+22 with the following KU31

255/30/19 $5200

265/30/19 $5100

275/30/19 $5200

or

KU36 285/30/19 $4900 will need to check with kumho if they any stock left

I just got mine fitted today. I got 19x9.5 +22 at the front and 19x10.5 +12 at the rear. They pop out a fair bit at the rear, I figure once I put some coil-overs on and drop it a little they should camber in and sit a little more flush. Either that or I put some spacers on the front.

Pretty happy so far, I do wish you could fit centre caps to them though.

Looks good, but needs to be lowered.

Hey guys,

More stock is arriving at the end off the week!! So buy yourself a Christmas present!!

18x10+20

18x10.5+15

18x11+18

18x9.5+22

17x9.5+12

17x9+22

  • 3 weeks later...

What is the price difference between 18 x 10.5 and 19 x 10.5?

and do you know if you need gaurd rolling or anything for R33 GTR to fit 10.5's all round?

cheers

Daz.

Only $300, i don't think guard rolling is required for a R33 but the R32 it's a must. We also have 18x10+20 in stock if you want..

  • 1 month later...
  • 4 weeks later...

How much for a set of 18 by 9.5 +22 offset without tyres including shipping to Hamilton, New Zealand?

Freight would be a killer, if you can get a quote on your side it could be cheaper. i'll find out and advise on our side

hi mate looking for 18x10 et 35 and 18x9 et 35 as i need to put adapters to fit my car

They come in those sizes you want, the closest is 18x10+20 and 18x9.5+35 or 18x9.5+22. Not sure by what you mean adaptors? Do you mean spacers?

hi mate sorry should have explained, im looking to put them on my audi and need to fit an adaptor plate to do that. it usually knocks 15 off the et. looking to get rim size/offset close to 18x8.5/9.5x et13 and 18x10 et19 so im looking at offsets around et 28 and 35 before fitting the adaptor. sorry if i rambled on

hi mate sorry should have explained, im looking to put them on my audi and need to fit an adaptor plate to do that. it usually knocks 15 off the et. looking to get rim size/offset close to 18x8.5/9.5x et13 and 18x10 et19 so im looking at offsets around et 28 and 35 before fitting the adaptor. sorry if i rambled on

Ok the closest is in 5x114.3 is as following unless you want the normal TE37 which has a lager selection of offsets and iszes

18.9.5+35 or +22

18x10+20

Regular TE37- they don't come in 18x10 only 10.5+15 or +22

18x8.5+22 or +30

18x9.5+22 or +35

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...