Jump to content
SAU Community

Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

yes, Dean, wtf is going on? :D ... cmon we are all busting to know where and when :)

p.s. does anyone know what time is what at the ute muster? I was thinking of going and checking out the ferals (SAU company excluded John, Martin and Henry :( ). Anyone know the schedule?

Ok im sending out Pms on meeting spot now. Im still not entirely sure on where we can go cos i havent had a spare minute to go out and do the route i wanted to, so instead i will do somethin that everyone wants.

So suggestions here if u have any, otherwise i will work out somethin from now til sunday, or someone will suggest somethin then? Also does anyone wanna have a lunch break stop?

Cyas

People I pm'd:

midnightslider

legend

The Jester Of Oz

skidmark

nismostu

N/A®

hippy

Steve

4door_Sleeper

Jase

cell

paullys 32

P1E

TIMMMAYYY

Nightcrawler

VIPERGTSR01

If u r not here, that means u havent been sent a pm.

Cya all there :)

I notice some of the old schoolers like whatisname, Bugalugs, grepin and freebaggin are missing from the list.

It's UNAUSTRALIAN not to cruise on the Australia Day long weekend!!!

.... I guess I could kinda be an old schooler, as I turned up on the scene around the birth of SAU - not unlike yourself :)

Pity Rob sold his 33, Andy sold his 33GTR and Pawley has disappeared from the cruising scene :P .... so many memories ....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...