Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

post-43305-1272500254_thumb.jpg

post-43305-1272500324_thumb.jpg

post-43305-1272500340_thumb.jpg

post-43305-1272500363_thumb.jpg

post-43305-1272500372_thumb.jpg

post-43305-1272500383_thumb.jpg

post-43305-1272500398_thumb.jpg

post-43305-1272500475_thumb.jpg

post-43305-1272500486_thumb.jpg

post-43305-1272500495_thumb.jpg

post-43305-1272500504_thumb.jpg

post-43305-1272500512_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/318538-rb25det-parts-for-sale/
Share on other sites

Prices are as follows:

Built motor: $7000 (head in the process of being freshened up as is the block with new pistons/rings & bearings so will be a totally fresh motor with 0k's on it)

Turbo kit: $2000

Intercooler kit: $400

Injector/Plenum kit: $1700

ECU/Ignition kit: $1750

Coilovers: $1500

Tailshaft: $400

GTR rear end: $800

eBoost2: $500

Gauges/mount: $200

The parts above combined, made 535rwhp on 21psi on pump fuel in my 32...

if it was in such good condition why is it being 'freshened up'?

... Mark, because I thought it's a good thing to do for the new owner - put in a fresh set of pistons/rings and refresh the head. At least then they know that the motor is brand new...

can u give me all the specs on the turbo, rear housing and wheel sizes

cheers

Sure:

Turbo = 714568-1

CHRA = 706451-5

Wheel diameter (inducer) = 61.4mm

Wheel diameter (exducer) = 82.0mm

Trim = 56

Comp A/R = 0.70

Turbine wheel diameter = 68.0mm

Turbine trim = 84

A/R - .82

Type - 4bolt

:(

Edited by lilmissr32
Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I have for sale the following parts which I have divided up into 'kits', however I will separate them but will not separate the motor (rocker covers to sump). I will also sell the whole lot as a package as well, it made 535rwhp consistently @ 21psi on pump fuel in my car. All parts are in very good condition too and I have posted up some pics, for any more please request them:

BUILT MOTOR (rocker covers to sump - covers are painted in House of Kolour paint and are in excellent condition) - parts included as follows:RB25DET series 2, step 2, 264 degree inlet & exhaust Tomei cams with 10.5mm lift, Type B Tomei valve springs, ported head,Tomei cam gears, Tomei 1.8mm metal headgasket,Forged pistons & rings (20thou over),RB26 Tomei I'Beam rods,ACL Race main & big end bearings, N1 oil pump, Custom sump & pick-up (holds 9 litres of oil), braided lines for oil cooler, Malpassi Race adjustable regulator, R33 power steering pump & reservoir

hi is the microtech 4 sale and do you know wether they can tune rb25 motors good just curious thankx

RADIATOR:

Alloy 4-core (works well, nothing wrong with it but needs a good polish - I'm willing to get that done for the buyer so it looks good again!)

TURBO KIT:

Garrett 700hp GT3540R ball bearing turbo with braided water & oil lines & speedflow fittings, Turbosmart Ultragate wastegate with screamer,

stainless exhaust manifold, Drift air filter & custom pipe from compressor housing

INTERCOOLER KIT:

600x300x100 with 3" outlets, including custom hot & cold piping to suit 35R & Greddy plenum

INJECTORS/PLENUM KIT:

870cc Siemens top feed injectors, custom fuel rail, Greddy plenum, Q45 80mm throttle body

ECU/IGNITION KIT:

Microtech LT12S ECU & loom, Microtech X6 ignition box,Bosch HEC715 coils with MSD leads

SUSPENION:

Tein Super Street coilovers (near new)

DRIVELINE:

Custom 1-piece tailshaft (rated at 1000hp), R32 GTR rear end (complete with 32 GTR 2-way mechanical diff)

INTERIOR:

eBoost2, Autometer Ultralite boost (30psi), Air/Fuel meter & oil pressure gauges in custom polished alloy mount

  • 2 weeks later...
Hi guys,

I'm currently parting out my R32 GTS-T/RB25DET Skyline. Please call me on 0409 304 104 or PM me on here for prices/further details. Location of parts is Brisbane.

I don't suppose you still have your old Std RB25 pistons? I'm chasing 4 and a set of exh valves. Can you help? 0438526858

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...