Jump to content
SAU Community

Boost Gauge + Water

johnnysr33
 Share

Recommended Posts

Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

Well just installing the gauges you could do yourself for free, it's easy as.

$6000 would include the cost of turbocharging your engine so as to actually make a boost gauge useful.

*EDIT* I am assuming your car is non-turbo considering you posted this in the naturally aspirated section...

Edited by Hanaldo
Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

Yeh my advice would be to install it yourself mate. The hardest part is finding a place in the firewall to feed the wires. It's so easy to do, it really isn't worth paying ~$150-$200 to get someone to do it for you

Edited by Hanaldo
johnnysr33 Apprentice

johnnysr33

Posted
  • Author
Posted

its a turbo.. sorry for posting this in the wrong section!! yeah i have considered doing it myself but just a bit scared, my mate done it to his skyline now all his dash lights are flashing on and off and random times :S but ill read into it some more and if im confident enough then ill do it if not wouldnt mind paying for it to get pro done. thanks heaps for the advice!!

mad082 Grand Master

mad082

Posted
Posted
its a turbo.. sorry for posting this in the wrong section!! yeah i have considered doing it myself but just a bit scared, my mate done it to his skyline now all his dash lights are flashing on and off and random times :S but ill read into it some more and if im confident enough then ill do it if not wouldnt mind paying for it to get pro done. thanks heaps for the advice!!

well then make sure you don't let your mate anywhere near your car.

for the water temp gauge you need to make sure you have the temp sender that goes with the gauge. without it it won't work. also you will need an adapter to put it into the radiator hose.

boost gauge is very easy to do. only slightly hard bit is wiring up the lights, but you could always just run all the hose through so the gauge works and then just take it to an auto electrician and them them to sort out the wiring. should only take them a few mins and not cost much at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Why are people so insistent on making dirty water?!
    • Dose Pipe Sutututu
      Duncan's V37.......race car?

      By Dose Pipe Sutututu · Posted

      Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...