Jump to content
SAU Community

Recommended Posts

cool thnx. I went to dr drift sometime last year and he said $900 to do it.

But il go pass again and ask him.. (busy man)

If u dont mind me asking, How much power did u get with the set up that i got now?

thnx harey :P

I have the same as you except I still have the stock dump pipe. I made 190rwkw with the boost dropping down to ~9psi at redline. Car feels very strong, especially the mid range. Overall I am very happy, I have even decided not to go the next step of bigger turbo etc because it feels great on the road. I am not really into 1/4 mile racing etc, just want a quick streeter. Car is super smooth.

You should make very close to 200rwkw.

I have the same as you except I still have the stock dump pipe. I made 190rwkw with the boost dropping down to ~9psi at redline. Car feels very strong, especially the mid range. Overall I am very happy, I have even decided not to go the next step of bigger turbo etc because it feels great on the road. I am not really into 1/4 mile racing etc, just want a quick streeter. Car is super smooth.

You should make very close to 200rwkw.

cool.. 200rwkw with 10psi right?

im going for 12psi. close to 220rwkw?

thats when the fuel pump comes in yea?

Whats your budget? and are you planning on something big in the future?

well if your asking me, My budget is about 6-7k. im looking for 250+rwkw streeter and il be happy. If its gonna cost me that much, I was gonna upgrade it to a GTR.

Point me out to the right direction if u can plz.. good to see u made 300rwkw on yours.

thnx

Edited by tavstar34

proven 250+rwkw setup. please keep in mind the price ranges go from basic just jap shit to high end japanese brands

minimum 3" turbo back exhaust ($1500 - $2500)

040 bosch fuel pump ($300)

FMIC ( $300 - $2000

Power FC (or alt REPLACEMENT ECU not piggy back) ($1500 - $2000)

highflow oem turbo (but personally id go with a gt28 turbo) ($800 - $1500 )

personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400. the key is to use good parts to give you room to upgrade on later on rather then replacing it all together like shitty piggy back ecus.

my 2c

Highflow is not really a bad idea if you want to (try) to avoid being raped by the EPA. Same also applies to ECU's. That said if you aren't in vic, or your car is track only then get whatever you want :P

Or you could get a GTR. Most would say that the best money spent on upgrading a GTT or GTST is by selling it and buying a GTR :P

proven 250+rwkw setup. please keep in mind the price ranges go from basic just jap shit to high end japanese brands

minimum 3" turbo back exhaust ($1500 - $2500)

040 bosch fuel pump ($300)

FMIC ( $300 - $2000

Power FC (or alt REPLACEMENT ECU not piggy back) ($1500 - $2000)

highflow oem turbo (but personally id go with a gt28 turbo) ($800 - $1500 )

personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400. the key is to use good parts to give you room to upgrade on later on rather then replacing it all together like shitty piggy back ecus.

my 2c

Also:

Injectors 500cc+

Z32 AFM

Upgraded Clutch

I would be surprised if you had it all up and tuned for 6-7k unless you can do a lot of work yourself.

personally i would stay away from a highflow, its pointless and a waste. you can spend another $300 and get a gt28 turbo that flows almost 2x as much and is a much better. and you could sell your r34 turbo to someone who does want a highflow for a good $400.

Hi-flowed turbos with OP6 housings are proven +250rwkw turbos.

Off the top of my head I don't know too many GT28 based turbos with a T3 turbine housing unless they are mated to Nissan housings. The HKS GT-RS is one, (the HKS 2835 ProS doesn't count as it is a GT30 based turbo).

The statement about flowing almost 2x as much is completely incorrect.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...