Jump to content
SAU Community

Recommended Posts

Here's my story...

2 Years ago I finally purchased my dream car, R33 GTR its a 1996 V-Spec

Now practically as soon as I purchased it, the motor went BANG! I was heartbroken.

Reluctantly I began sourcing parts for the rebuild! I wanted to do it once, do it right, so the entire process took quite a while and my dream was simply left parked in the garage for a year while the engine and parts were being sourced and put together.

So in November 2009.. After a long wait, and a few dramas in between the car was all back together in one piece, all was going well.

I ran in the motor, and took it fairly easy for the first few months. I have covered 3,000km since the rebuild, running standard ecu, standard boost for the entire period.. yesterday I took it to my tuner, to connect a boost controller so we could run some more PSI through those turbos!

All was well, then suddenly noticed a horrible rattling sound from the engine... the type no one should ever hear!

Went back to my builder today and my worst fears were confirmed.. suspected conrod bearing!

I'm absolutely devastated! I'm not sure what to do... Having bought my first home recently means I don't have enough funds to have it all pulled apart and fixed again!

In total over the past 2 years I have sunk around $50,000 into this car (including purchase price)

Here's a run down of parts:

Eagle Rods

N1 Water Pump

Nitto Oil Pump

Extended Sump

Arias Pistons & Rings

ACL Race Series Conrod Bearings

ACL Race Series Main Bearings

HKS Dump Pipes

Nismo Exhaust

Nismo SP Suspension

Nismo LM GT1s

Nismo Engine Mounts

Nismo 320km Dash

Ross Harmonic Balancer

Garrett GT2860R-5S Turbos

Nismo Coppermix Twin Plate 640PS

Toyo Proxes T1R 275/35ZR18

All parts purchased BRAND NEW

Not Yet installed:

Apexi Power Fc

Sard 700cc Injectors

So my question to you is..

Should I keep it locked up for another year or 2 while I save $$ to fix it

Sell it? If I was to try to sell.. realistically speaking whats the best I could hope for?

Strip it?

Either way its a lose, lose situation.. i'm simply devastated! :yes:

Link to comment
https://www.sau.com.au/forums/topic/319575-heartbreak-again/
Share on other sites

Your engine builder needs a kick in the teeth for one. This should not happen to a freshly build RB26 especially if you havn't been giving it any track time.

At this stage, I would say put it away for a rainy day, continue the build slowly. Your too far into it at this stage to simply sell up, you'll loose thousands and thousands miss out on the gradification of all the money poured into it this far.

Either tuner abuse or poor engine build - I can't see how it could just chew a bearing at its own accord.

If the builder put this engine together for you, isn't it the engine builder's problem? The builder should stand by his work. I can't see how a fresh new engine can lunch a bearing ... unless he recycled the old ones?

:yes:

That sucks mate! Especially with all the shit you've been through, including the break in! As said, the builder should be coming to the party in some way. I wouldn't sell it, you'll lose way too much then regret it down the road. If it were me, I'd just keep it and work on it slowly rather than get rid of it completely

If the builder put this engine together for you, isn't it the engine builder's problem? The builder should stand by his work. I can't see how a fresh new engine can lunch a bearing ... unless he recycled the old ones?

:yes:

I've had the discussion of liability with him, he argues if it had been of his doing, then this would have happened within the first couple of hundred kms

I'm going to lodge something with consumer affairs/fair trading and see what comes from it...

but to be honest I don't think I can go through the whole process again.

I've had the discussion of liability with him, he argues if it had been of his doing, then this would have happened within the first couple of hundred kms

I'm going to lodge something with consumer affairs/fair trading and see what comes from it...

but to be honest I don't think I can go through the whole process again.

err, I was in engine reconditioning for 20 years and we would always stand by our engines.....that comment is a load of cock.

if he used s/h bolts or didn't torque them correctly or didn't check brg crush before assembly, etc, etc, etc........then this can happen months done the road.

what did your tuner do?

have you checked the simple things like oil level?

if you haven't been launching it and your tuner hasn't got a happy foot, I'd be asking questions of the builder.

Speak to OCBA first.

Oil level and pressure is perfect!

I haven't launched it ever and not once took it over 7000rpm, been waiting to install support mods before giving it a real drive.

like I said, see someone at OCBA first, but I'd be telling him to either fix it or you'll get someone else to fix it and send him the bill.

Did he make you sign a waiver that none of his work would be guaranteed....even that piece of paper wouldn't hold any weight if it hasn't been too long since the build.

Whether a business offers warranty or not for their work is besides the point, the law requires them to stand by their workmanship..........unless of course it's a race car then I suppose it becomes a moral obligation.

isnt it called statutary warranty?

if u pay $5000 for a tv and it last 2 yrs then u have a leg to stand on..

give it a go man! whats the worst tgey could say no? and be at the same point!

yeh i've heard about it before, definitely going to be following it up

Sorry to hear about that David! My vote goes towards chucking it in the shed until you can afford to fix it up rather than selling it - atleast one day you'll be able to enjoy it instead of offloading it now for next to nothing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...