Jump to content
SAU Community

Has anyone delt with this Kristian Hanc****?


Recommended Posts

I ordered a apexi powerfc from this guy who apparently runs www.JapaneseImportParts.com

He told me the he would email me a receipt as soon as the money was deposited into his account, its been there all day since this morning and ive heard nothing of him, and no replies to any emails, also no contact number on the site.

I was a bit skeptical about ordering something online and now I know why, this is dodge.

Have I been ripped or is this guy just lazy?

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Mate I work as a system designer for an online computer company. Quite often it can take two working days for a money transfer to go through. So he may have not even received your payment yet.

I think you are not allowing a reasonable amount of time for your money to clear.

I went into the bank itself and put it straight into the account, I dont know about other banks but when I do it to my own account the money is available as soon as its deposited.

It wasnt an online transaction or anything.

But ill take your advice and wait it out for a few days if need be.

I developed the website and know that Kristian is usually quite busy with orders etc... like everyone else has said, I think you should be a bit more patient. I'm sure he isn't sitting looking at his account balance waiting for your money to go in...

just give it a bit more time before you start complaining eh...

I went into the bank itself and put it straight into the account, I dont know about other banks but when I do it to my own account the money is available as soon as its deposited.

It wasnt an online transaction or anything.

But ill take your advice and wait it out for a few days if need be.

He is a little slow in responding but does eventually get there. I have just purchased a PFC and H/C from Kristian. Did C.O.D no dramas, PFC arrived within timeframe but still waiting for the H/C.

Cheers

Muz

Who said I was giving the guy a hard time or complaning? and I dont need 200 people replying saying to wait a few days, ive read it once, if you have nothing else to add, then dont post here, that simple.

As I said before, whenever I deposit money in the same way into my account its available then and there, thats why Im asking. Im not knocking the business or saying hes not legit, im asking questions as ive never bought online before and cant get any reply from him.

A reply email at least would be nice, it was taking <1min yesterday with emails, now he has my money I havnt received an email from him all day when I was supposed to get an email quote: "I will also email you a receipt as soon as payment is received"

Who said I was giving the guy a hard time or complaning?

errr...please read your first post...it sounds to me like you're complaining....calling the guy lazy and online shopping dodge...errr....of course it is! you put your trust in the guy when you bought your powerfc...thats what its all about...and i'm sure you didn't do that without first doing some research into the guy and his company? And i'm sure you spoke to people about his reputation and whether or not he delivers before buying the powerfc?...so why don't you just keep with the trust and wait a few days like everyone else has suggested? :P I'm sure you're panicing over nuthin...

gtargh i think you should be a bit nicer in your replies after all these guys are only helping. Also does he have bank with the same bank as you as i know it takes at least a good 24hours to transfer from different banks rather then just deposit into the same bank. Also i wouldnt think he would drop everything just to see if the money has gone in cause i would assume customers that walk into the shop may have a bit more priority then those over the net.

I ordered a apexi powerfc from this guy who apparently runs www.JapaneseImportParts.com

He told me the he would email me a receipt as soon as the money was deposited into his account, its been there all day since this morning and ive heard nothing of him, and no replies to any emails, also no contact number on the site.

I was a bit skeptical about ordering something online and now I know why, this is dodge.

Have I been ripped or is this guy just lazy?

gtargh--->

I'd say you are just being damn picky. Did you consider that sometimes people are busy, or sometimes dont spend their entire life infront of a computer ???

Just slow down and act like a normal person. How dare you say I am Lazy or that I have ripped you off, or that it is dodgy, you may want to just be careful, or your business may not be welcome. You put the money in some time TODAY. Take some time to BREATHE and GIVE ME TIME TO CHECK THE BALANCE and actually Type up your reciept !!!!!!! :cuss: :cuss: :cuss:

Sorry I was out of the office all day today, I was organising the pick up of a Supra from the international docks in Sydney, that I just imported from Japan. I then had about $5,000 worth of parts to pick up and deliver, some of which I was still out delivering tonight just before midnight to other Skylines Australia members... "Endorean" and "Lozza 150"

Sorry I didnt reply to your emails straight away, but being out of the office all day sort of makes it hard to do so until I got home (about 5 minutes ago).

If you have a look at the top of every third page of SKYLINES AUSTRALIA you will actually see my business name, JAPANESE IMPORT PARTS. We sponsor Skylines Australia, and I'd say we are pretty well known by the online car enthusiest community, and are known to be a reputable business to deal with.

I will now check my inbox, and reply to these "emails" you said you have been sending me all day.

Thanks to all the guys who have replied here and backed me up till I had time to sit down for the first time today and actually check my inbox etc... I appreciate your support.

Kristian.

Owner/Manager

Japanese Import Parts

I got mu HKS Super Dragger exhaust last night.... One of many parts that I and many others have ordered through Japanese import parts. Buying online is totally different than in a store..... (DUH!!) it took a few weeks to get here.... but it was worth it for the minimal price i paid for a complete exhaust...!!

Lawrence

To the guys that said wait awhile, I have no complaint against, as I said fair enough ill wait it out a day or two. To the others that didnt even bother reading my post properly, ill say it again, it wasnt a TRANSFER, it was a DIRECT DEPOSIT at his branch directly into his personal account, there is no waiting 12-24hr for the money to go in.

I would of had no problem waiting 1-2 days for acknowledgment that the money had gone in if need be, but "I will also email you a receipt as soon as payment is received" and "GIVE ME TIME TO CHECK THE BALANCE and actually Type up your reciept!!" are two very different things.

DONT LIE TO YOUR CUSTOMERS and YOU'LL HAVE NO WORRIES! if you said it may take you 1-2 days to check the deposit I would of been happy to wait. Its easy for you to sit there when your just taking someone elses money, but your not the one giving money to someone else are you

You guys know I have no problems with what half of you said, but the ones that saying "stop ya complaning/whinging/trying to put his business down" etc is bullshit, I have a right to be concerned about my money and I was trying to find out what was going on as I have never purchased something online before.

To Nexus9, MJ, and the others that replied saying I need to wait longer, thanks for your input and not being asses about it, my apologizes to you if you think I was having a go at you, cause I wasnt.

Buying online is totally different than in a store..... (DUH!!)

Gee arent you a smart one, you think I dont realise that I would have to wait? you miss my point. Ive said 3 times already about the receipt thing, so if it hasnt sunk into your little head yet chances are its not going to.

than settle pettle.... getting worked up over a reciept that was not delivered within 10 sec's of a transaction.

Ok so you didn't get a reciept straight away.... ok that was something you wanted/needed to feel secure that your money had gone to the right person, and that your parts would be ordered and you will recieve confirmation that the parts were orded and a time frame set for delivery. Right??

my little head...?? hey how did you know?? ... this internet thing is cool.... where is the camera..??

anyway... You would be amazed at the amount of people that buy online/from internet business etc that pay for stuff and ring the next day demanding where there parts are..?? Even after it has been explained numerous times that there is a wait involved... (just pointing out a fact here dude...)

anyway... mate you didn't get a reciept as quickly as you wanted... I think it is a little harsh that you get on a public forum and flame the man's business and his credibility... with out thinking... Yes you did the right thing's to contact Kristian, you did flame his business online... I personally thing that was a bit harsh....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...