Jump to content
SAU Community

Recommended Posts

Hi Guys

last week i noticed this for the first time, i drove from Newcastle to Port, went through some hills and my car started to splutter and loose power now this was new to me as it wasn't a missfire as such but more of a sruggle to make power then die.

i have worked at Port all week and the car has been fine, not a drama. i gave it a boot afew times and nothing. Now last night i drove to Coffs and it was fine but today i was giving it a little and about 15mins latter it spluttered and died in the middle of a round a bout mind you lol.

It seems to happen when the car is hot, could this be spark plugs/coil packs? at first i thought fuel pump but it's been fine all week.

it's really wierd.

Mods: front mount

3.5inch exaust

Standard turbo

Boost controller running 10psi

coil packs are stock but siliconed

i pulled the plugs out thisarvo and they have the usual blackness and coil packs look okay.

Any ideas?

Cheers

Cam

Link to comment
https://www.sau.com.au/forums/topic/319804-problem-with-r33-gts-t/
Share on other sites

ok, if it is the CAS will this slowly get worse? can this be easy tested to see if it is? and how much roughly to fix?

at this stage with work i don't have the time to fix but need my car, if it's easy to do yourself i will do it.

i drove it today for about 5mins just to see if it would go, it seems to be when it gets hot it does it

cheers for the help guy

Cam

well the known baddie you have is the taped/botched coilpacks

you already know these were causing an issue last time as you have repaired them

so the most likely culprit is the coilpacks - i can't understand how the CAS is at fault, unless it has come loose

how often does a CAS fail? i cant recall a single CAS Failure? it seems in the last two weeks everyone posts "CAS" is at fault. check the basics. check your coilpacks, check base timing at idle (that would confirm if CAS is toast or not)

If it died in the middle of the round a bout then i'd say CAS.

Won't be coil packs.

CAS's play up in some fken weird ways. Car can be fine for a week and randomly die, and then it might die twice in the next hour and then be fine again for another week.

My CAS when it was failing did exactly that - made it a bastard to diagnose

Ahuh...cheers..i always figured it was a sensor of some sort causing it, it only really happens when cars been undriven for a while, if i give it a bit of a flogging it always corrected itself...

So what would be wrong with it, or does it just need replacing?

  • 2 weeks later...
  • 2 months later...

Hi guys, thought I would let you know the diagnosis of my problem. Turns out it was a faulty airflow meter, yep the symptoms matched what you guys were saying about the Cas had it looked at didn't find nothing, when it did it again we put the computer on it and yay. So take note the airflow meter can cause similar issues, and after a new set of coil packs, plugs, I even got a cas. thank god we got there

cam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...